Building the Bitx40 ~ The how to for the newcomer!
About a month ago I agreed to give a Skype presentation to a local ham club known as the Ventura County Amateur Radio Club (VCARC) on the subject of homebrewing. Hey I am really good at soldering my fingers together so I guess I sort of qualify as a homebrew radio enthusiast. In the course of discussing the presentation with the club president Joe, K6NE, I suggested that the club might want to engage in a club project using the Bitx40 board available from India for the amazing price of $45 shipped to your door. Bitx40
is the link to the website where the radio can be purchased.
[The club presentation will take place two weeks from today and so I have been under the gun to get everything completed.]
For your $45 you get a complete built radio transceiver board with all of the controls, connectors, wire harnesses and even a microphone element and PTT. As shipped the radio is on 40M and is capable of over 5 watts output. The means of frequency control is a voltage tuned oscillator using a panel mounted pot to change the frequency. It works but a better alternative is to purchase the Digital VFO kit and LCD which adds another $14 –so less than $60 and you have quite an impressive radio. I purchased my board in late November 2016 and the Digital kit was not offered so I rolled my own Arduino/AD9850. The add on kit uses the Si5351 PLL.
Thus the builder (in this case the club members) provide the value added by integrating the parts and pieces into an enclosure and along the way learn about the nuts and bolts of the radio. VU2ESE developed this kit specifically to learn about what makes up a transceiver and to experiment to your hearts content and indeed he has met that goal.
To aid the club with this project I volunteered to create a series of webpages hosted on my website so that in addition to the excellent information on the http://hfsigs.com
website that I would provide detail on how to execute the actual build. My webpages have many links to where you can purchase enclosures or special tools and even a grounded soldering iron.
In the early days most ham stations were entirely home built and thus many of the fundamental hand tools and parts were in the junk box. But today it is “flash the plastic” and in two days UPS has a black box radio sitting in your shack. So to actually build something takes a lot more effort. My webpages make it an easier task. Hey are you looking for a QRP SWR bridge (there is a link to the DX Engineering MFJ Model 813). Well in my case I built my own but not everyone wants to do that.
So here is the link http://www.n6qw.com/Bitx40.html
There are sub links that explain how to metal bash, detail on the wiring (including a link on where to buy the wire) and the check out process. Again my pages are to supplement what is on the www.hfsigs.com
I have made four contacts with this radio and this has been a fun project but now I need to move on and this will be the last posting on he Bitx40.