Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

97 x 35 dots graphic LCD interface

97 x 35 dots graphic LCD interface

This is a small I2C 97×35 dots LCD with integrated controller and LED backlight. You will need these routines to display text or graphics with an 18f452
These routines take only 6% ROM and 3% RAM from a 18f452. So there will be enough space left to do other things.

All important pins are left free for later use: INT0, A/D converters and Timers.

Power save: there is a power save mode available on the module, but sadly enough this mode still takes around 3mA at 5V.

The big advantage is that the module is entirely driven by i²c. The backlight is also nice. Annoying thing about this LCD is that it needs an external -8V, but of course, there’s a solution for that! Indeed, i chose to use a simple voltage inverter with a CMOS 555. It could be done more easily with an additional 9V battery.

Visit Here for more.

 

More Articles to Read

avatar
EEWeb
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Arduino Blog
avatar
Ken Shirrif
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Freetronics
avatar
Arduino Blog
avatar
Dangerous Prototypes

Top




Shares