Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

External Winamp Control

External Winamp Control

I decided to make a external control painel, to make it easier to change musics, volume up or down, toggle shuffle and many other features by pressing just one button. I found one winamp plugin that shows how to configure a external control using the Serial Port, being able to make 4 or 15 buttons control.

Material:

4 push-buttons 
SERIAL connector 
Connector Box 
Cable 

Necessary tools:

Soldering iron and accessories 

As you can put the buttons wherever you want, I decided to put mine in one old diskbox.
I decided to use a network cable to connect the Serial connector to the buttons, because its easier to organize and makes the work simplier and faster.

Making the control:

Looking in the scheme, we see that we have to connect one side of each buttons to one cable, these will be solded in the pin number 4. 

After have done the soldering in one side of each button, you must then connect the other side with a cable that goes to the pins of the serial, now however is important that they are connected with the indicated pins (Just follow the scheme) .
Here you can see a picture of my work until now, it looks quite ugly I know, sorry. 

Configuring Software 

The software I used in this was COM-port Winamp Control V.1.42, you can download just by clicking on the name.

You must set the COM port you are using, usually normal computers have up to 2 ports, so just select the one you plugged the control. 
Select the number of buttons does your control have. (In this HowTo, we’d choose the “4 buttons”) 
Now you much remap the buttons, Its now the time you’ll see it is everything working. If you are able to remap all the buttons, congrats, its working!! 
Its ready, now the last step, you have to configura what you want the buttons to do. This can be found in the “WINAMP” of the program. There you can setup many different options, like Volume Up, Volume Down, Next Song, Previous Song. 
One cool stuff is there in “Type:”, where you can configure the way you wanna the buttons pressing to respond. 
Click: Just one click to make it work. Can work with one or double-click. 
Down/Up: This will activate the option when you press and a different one when you release the buton. 
Turbo: Here you configure the options for holding the button, usually used for Volume Up and Down. 
Clicks + Turbo: You can configure “Clicks” and “Turbo”Option at the same time 
Clicks + Hold: You can configure “Clicks” and “Hold” Option at the same time

Visit Here for more.







 

More Articles to Read

ESP8266 Kit Released
ESP8266 Kit Released
An Arduino laser pinball machine
An Arduino laser pinball machine
CTCSS fingerprinting: A method for transmitter identification
CTCSS fingerprinting: A method for transmitter identification
TI DLP® Pico™ Technology for Aftermarket Head-up Displays
TI DLP® Pico™ Technology for Aftermarket Head-up Displays
Brute force computation for cheap log digital potentiometer
Brute force computation for cheap log digital potentiometer
Smart "Homer"
Smart "Homer"
A DIY Segway-style vehicle
A DIY Segway-style vehicle
Superbeta transistors inside: Die photos and analysis of the LM108 op amp
Superbeta transistors inside: Die photos and analysis of the LM108 op amp
Peeqo is a desktop bot that communicates through GIFs
Peeqo is a desktop bot that communicates through GIFs
Using a Programmable Input Multiplier to Minimize Integer Boundary Spurs
Using a Programmable Input Multiplier to Minimize Integer Boundary Spurs

Top


Shares