Here is how to install a wireless game adapter into your XBOX internally so that you can have a wireless connection, where available, without the extra hardware.
Step 1: Open the XBOX:
See http://www.xbox-scene.com/articles/open1.php (Courtesy of www.xbox-scene.com). If you followed the instructions correctly, you should be looking at the XBOX motherboard with the HDD, DVD-ROM, and their ‘racks’ removed.
Step 2: Prepare XBOX
You need to make a little room in order for the adapter to fit without being stressed to a breaking point.
- a. Trim out all of the metal flashing along the back side with a dremel and cutting wheel, or a pair of tin snips. You may have to fully remove your motherboard, power supply, and fan; pull out the entire metal piece, and cut it while it is removed. Replace when finished.
- b. With diagonal cutters or Dremel if you have it, trim out the underneath of DVD tray so that your wireless adapter board will fit in the same area. I had to cut out more than is shown in the picture, all the way over and into the vertical tube my hand is holding (marked in red).
Visit Here for more.