Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

Variable DC Power Supply

Variable DC Power Supply

A Variable DC Power Supply is one of the most useful tools on the electronics hobbyists workbench. This circuit is not an absolute novelty, but it is simple, reliable, rugged and short-proof, featuring variable voltage up to 24V and variable current limiting up to 2A. Well suited to supply the circuits shown in this website.
P1 sets the maximum output current you want to be delivered by the power supply at a given output voltage.
P2 sets the output voltage and must be a logarithmic taper type, in order to obtain a more linear scale voltage indication..
You can choose the Transformer on the grounds of maximum voltage and current output needed. Best choices are: 36, 40 or 48V center-tapped and 50, 75, 80 or 100VA..
Capacitor C1 can be 2200 to 6800µF, 35 to 50V..
Q4 must be mounted on a good heatsink in order to withstand sustained output short-circuit. In some cases the rear panel of the metal box in which you will enclose the circuit can do the job..
The 2N3055 transistor (Q4) can be replaced with the slightly less powerful TIP3055 type.

Visit Here for more.

 

More Articles to Read

avatar
EEWeb
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Arduino Blog
avatar
Ken Shirrif
avatar
Dangerous Prototypes
avatar
EEWeb
avatar
Arduino Blog
avatar
Freetronics
avatar
Arduino Blog
avatar
Dangerous Prototypes

Top




Shares