Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Point to Point Versus PCB Amps

Point to Point Versus PCB Amps

Most PCB amps that have been produced have been poorer than tube amps, for reasons having nothing to do with the PCB. Like plastic bobbins in transformers, this does nothing to change the tone. The other poor practices that go with a cost-cutting attitude that were introduced at the same time may, but PCBs are unfairly indicted.

Visit Here for more.

 

More Articles to Read

SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser
LED traffic light
LED traffic light
Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors
Teach Your Arduino to Switch Itself Off!
Teach Your Arduino to Switch Itself Off!
Control a tracked robot with your mind (or joystick)
Control a tracked robot with your mind (or joystick)
A 400W (1kW Peak) 100A electronic load using linear MOSFETs
A 400W (1kW Peak) 100A electronic load using linear MOSFETs

Top




Shares