Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

5 Watt AM Transmitter Project

5 Watt AM Transmitter Project

Schematic and instructions on a neat little 6AQ5 final rig you could build.
Be careful. Remember, the cathode of this tube is at 300 volts or more. Note on diode string: Start with 35 diodes.Use a three position toggle switch for S1. The High setting shorts out about 1/3 of the diodes in the string. Thi setting yields about 5 watts output with 100% positive peak modulation capability. The Lo position shorts out about 2/3’s of the diodes. This setting yields about 2 watts output with 200 % positive peak modulation capability.

Visit Here for more.

 

More Articles to Read

App note: Testing inductors at application frequencies
App note: Testing inductors at application frequencies
App note: Working voltage ratings applied to inductors
App note: Working voltage ratings applied to inductors
1968 Princeton Reverb Repairs
1968 Princeton Reverb Repairs
Skill Sunday: Power Over Ethernet for Arduino
Skill Sunday: Power Over Ethernet for Arduino
More on Color TFT Displays ~ The Big Ones — 240 X 320
More on Color TFT Displays ~ The Big Ones — 240 X 320
Vertical Pole Climbing Robot
Vertical Pole Climbing Robot
ESP8266 Weather Station Projects
ESP8266 Weather Station Projects
Single tube Lethal Nixie clock
Single tube Lethal Nixie clock
How to make a simple 1 watt audio amplifier (LM386 based)
How to make a simple 1 watt audio amplifier (LM386 based)
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade

Top




Shares