Here, the gate is driven 4ms after the zero-crossing (only PORTB2/PINB2 low : DIP-switch state = 4):
Fig. 7 – Triac firing with 4 ms delay
Green: Input AC
Yellow: AC Output after phase angle control
Pink: Gate Drive signal
Here, the gate is driven 4.8ms after the zero-crossing (PORTB2/PINB2 and PORTB0/PINB0 low : DIP-switch state = 5):
Fig. 8 – Triac firing with 4.8 ms delay
Green: Input AC
Advertisement1
Yellow: AC Output after phase angle control
Pink: Gate Drive signal
Here, the gate is driven 5.6ms after the zero-crossing (PORTB2/PINB2 and PORTB1/PINB1 low : DIP-switch state = 6):
Fig. 9 – Triac firing with 5.6 ms delay
Green: Input AC
Yellow: AC Output after phase angle control
Pink: Gate Drive signal
Here, the gate is driven 6.4ms after the zero-crossing (PORTB2/PINB2, PORTB1/PINB1 and PORTB0/PINB0 all low : DIP-switch state = 7):
Fig. 10 – Triac firing with 6.4 ms delay
Green: Input AC
Yellow: AC Output after phase angle control
Pink: Gate Drive signal