For Linksys WAP11, SMC MC2655W and the Netgear ME102. In my testing I used a Linksys WAP 11. These same commands may or may not work with other brands.
Before any of this worked I needed to upgrade my firmware to 1.4g.5. It’s likley that it will work with later versions but I have not tested it. All the tcpdump output and snmp commands are done in Linux. There are ports of these programs in Windows as well.
Advertisement
Using the information from the above article I sniffed the snmp information to set power in tcpdump. Note: the word “string” is the read/write snmp community string:
15:50:28.641418 > 192.168.2.233.32770 > 192.168.2.2.snmp: C=string SetRequest(46) .1.3.6.1.4.1.410.1.1.8.8.0=c7_c3_bf_bd_bb_bb_bb_b9_b9_b9_b9_b9_b9_b9
Visit Here for more.
