This relatively simple mixer was designed for three dynamic microphones, but can be re-designed for more or less. Level and tone controls are available to tailor the sound to your needs.
Parts required for this circuits.
Part Total Qty. Description Substitutions
R1, R2, R3 3 1K 1/4W Resistor
R4, R5, R6 3 10K Logarithmic Pot
R7 1 1Meg 1/4W Resistor
R8, R10 2 10K 1/4W Resistor
R9, R11 2 100K Linear Pot
C1, C2, C5, C6 4 0.1uF Ceramic Disc Capacitor
C3, C4 2 22nF Ceramic Disc Capacitor
U1, U2 2 741 Op Amp
J1, J2, J3 3 Input Jacks Of Your Choice
Visit Here for more.
