Browse over 10,000 Electronics Projects

Telephone Hold Button

Telephone Hold Button

Although a hold feature is standard on most new phones, a lot of us still use the origional bell phones. Those of us that require a hold feature will find this circuit very useful. It is easy to build, and is compact enough to be installed inside the phone with no real problem. It is also powered by the phone line itself, eliminating the need for batteries.
Part Total Qty. Description Substitutions

R1 1 1.5K 1/4 W Resistor Part Total Qty. Description Substitutions
R1 1 1.5K 1/4 W Resistor
R2 1 1K 1/4W Resistor
D1 1 1N4002 Silicon Diode 1N4003, 1N4004, 1N4005, 1N4006, 1N4007
SCR1 1 C106Y SCR
LED1 1 Red LED Green LED, Yellow LED
S1 1 Normally Open Push-Button Switch
MISC 1 Wire, Board, Case (If Used)



Advertisement1


Visit Here for more.

 


Top