Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

Tunable IF with TDA7000

Tunable IF with TDA7000

Based on Philips TDA7000 receiver chip. It is tuned with a BB105 varicap diode in the 13MHz IF band.
None of the indicator systems was satisfactory, and the actual stability of the receiver oscillator was so good that it wasn’t really necessary either. A simple system with a preset resistor for each of the the desired satellites was more than enough, a simple selector switch to select the channel.

Article by John Coppens ON6JC/LW3HAZ at http://jcoppens.com

Visit Here for more.

 

More Articles to Read

Single-Sided USB Charger
Single-Sided USB Charger
A FPGA controlled RGB LED MATRIX for Incredible Effects – the Hardware
A FPGA controlled RGB LED MATRIX for Incredible Effects – the Hardware
Using Nanotimers to Reduce IoT System Power Consumption by an Order of Magnitude
Using Nanotimers to Reduce IoT System Power Consumption by an Order of Magnitude
Replace a microwave’s beeping with the Windows XP startup sound
Replace a microwave’s beeping with the Windows XP startup sound
A DIY Laser Scanning Microscope
A DIY Laser Scanning Microscope
Reverse-engineering the surprisingly advanced ALU of the 8008 microprocessor
Reverse-engineering the surprisingly advanced ALU of the 8008 microprocessor
ESP8266 LED lighting: QuinLED v2.6 PCB
ESP8266 LED lighting: QuinLED v2.6 PCB
Switching LVDS Graphics in a Laptop Computer
Switching LVDS Graphics in a Laptop Computer
Teleknitting: TV-based string art
Teleknitting: TV-based string art
DIY Bubble Machine
DIY Bubble Machine
Start your day with Nerf target practice!
Start your day with Nerf target practice!
Teardown of a Peaktech 6225A
Teardown of a Peaktech 6225A

Top




Shares