Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

USB-FX2 Interface Board (USB-2.0)

USB-FX2 Interface Board (USB-2.0)

A small microcontroller-steered 16bit parallel IO interface board connecting external devices to a computer applying USB-2.0 (high-speed).
This is a USB (universal serial bus) interface board supporting USB-2.0 high speed mode (480Mbit/s).

Features:

Throughput: Actual continuous transfer rates of 35Mb/s (mega bytes not bits).

Flexibility: On-board 8051 microcontroller with 16kb RAM.

FIFO IO: 8 or 16 bit wide, additional handshake lines, 3.3V logic.

Several USB endpoints and buffering configurations (up to 512 bytes, quad-buffered); bulk, isochronous and interrupt transfer.

Several additional free digital IO lines.

Firmware download via USB; optional non-volatile 64kb EEPROM.

USB-powered and externally powered operation.

Very few discrete components.

If you would simply like to connect a microcontroller board to a computer using USB but don’t need massive bandwidth (less than 800kb/s), then you may want to have a look at the smaller and cheaper USB8Bit board.

Visit Here for more.

 

More Articles to Read

Vertical Pole Climbing Robot
Vertical Pole Climbing Robot
ESP8266 Weather Station Projects
ESP8266 Weather Station Projects
Single tube Lethal Nixie clock
Single tube Lethal Nixie clock
How to make a simple 1 watt audio amplifier (LM386 based)
How to make a simple 1 watt audio amplifier (LM386 based)
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Dot² isn’t your typical coffee table
Dot² isn’t your typical coffee table
Debugging ARM Cortex-M0+ HardFaults
Debugging ARM Cortex-M0+ HardFaults
EMP Jammer build
EMP Jammer build
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!

Top




Shares