Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Getting started with OPENOCD using FT2232H adapter for SWD debugging

Getting started with OPENOCD using FT2232H adapter for SWD debugging

Yahya Tawil wrote a tutorial about flashing EFM32 MCUs with OpenOCD using FT2232H adapter:

Learn how to make flashing your ARM-based MCU easy by using OpenOCD debugger with an FT2232H adapter.
Old MCUs from vendors like ATMEL and MICROCHIP, like the PIC16F and Atmega family, tend to have a special programming interface to program internal flash. For example, Atmega used SPI pins (MISO, MOSI, SCK) and PIC used two pins (PGC, PGD)— one as a clock and another as a bi-directional data line.
New MCUs, especially with an ARM core, use JTAG/SWD as a programming/debugging interface.

Full details at All About Circuits homepage.

Read more Here

 

More Articles to Read

Vertical Pole Climbing Robot
Vertical Pole Climbing Robot
ESP8266 Weather Station Projects
ESP8266 Weather Station Projects
Single tube Lethal Nixie clock
Single tube Lethal Nixie clock
How to make a simple 1 watt audio amplifier (LM386 based)
How to make a simple 1 watt audio amplifier (LM386 based)
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Dot² isn’t your typical coffee table
Dot² isn’t your typical coffee table
Debugging ARM Cortex-M0+ HardFaults
Debugging ARM Cortex-M0+ HardFaults
EMP Jammer build
EMP Jammer build
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!

Top




Shares