Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Eagle Tutorial – How to add a new package to a component

Eagle Tutorial – How to add a new package to a component

Save time by re-using existing packages and symbols .

There are thousands of devices in the ‘default’ library that comes with EagleCAD but whaddyaknow, the exact package/device you need isn’t always going to be one of those thousands. However, instead of making a brand new device from scratch every time you can often ‘merge’ two existing devices, or at least reuse the SMD package. Not only will you save time, but it can minimize mistakes. (Note I say it can – be sure to always always triple check pinouts, package sizes, dimensions and more!)

Eagle Tutorial – How to add a new package to a component – [Link]

The post Eagle Tutorial – How to add a new package to a component appeared first on Electronics-Lab.

 

More Articles to Read

Guide to build your 3.3v power supply
Guide to build your 3.3v power supply
SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser
LED traffic light
LED traffic light
Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors
Teach Your Arduino to Switch Itself Off!
Teach Your Arduino to Switch Itself Off!
Control a tracked robot with your mind (or joystick)
Control a tracked robot with your mind (or joystick)

Top




Shares