Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Dark Sensitive Lamp ON/OFF Controller

Dark Sensitive Lamp ON/OFF Controller

Dark Sensitive Lamp controller project switches a load connected to it when light falling on LDR (Light Dependent Resistor)  goes bellow set point.  It could be used as an automatic street light application. The project is based on Triac and doesn’t requires additional DC supply, it works directly on 230VAC.

Features

  • Mains supply input 230 VAC
  • Output load up to 500 W lamp / bulb
  • Snubber circuit
  • Sensor LDR
  • Screw terminal connector for easy input mains supply and load connection
  • Small size PCB
  • Four mounting holes of 3.2 mm each
  • PCB dimensions 37 mm x 49 mm

Dark Sensitive Lamp ON/OFF Controller – [Link]

The post Dark Sensitive Lamp ON/OFF Controller appeared first on Electronics-Lab.

 

More Articles to Read

Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors
Teach Your Arduino to Switch Itself Off!
Teach Your Arduino to Switch Itself Off!
Control a tracked robot with your mind (or joystick)
Control a tracked robot with your mind (or joystick)
A 400W (1kW Peak) 100A electronic load using linear MOSFETs
A 400W (1kW Peak) 100A electronic load using linear MOSFETs
Shirt Pocket Transceiver with the Si5351 and OLED
Shirt Pocket Transceiver with the Si5351 and OLED
All metal C930e webcam
All metal C930e webcam
The Soldering Tools That Make Your Life Easier
The Soldering Tools That Make Your Life Easier
App note: Operation evaluation of ultra low ON resistance MOSFET supporting quick charge for 1 c ...
App note: Operation evaluation of ultra low ON resistance MOSFET supporting quick charge for 1 cell Lithium ion battery protection
Synthesized Sidetone
Synthesized Sidetone
App note: Application precautions: Power MOSFET application notes
App note: Application precautions: Power MOSFET application notes

Top




Shares