Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Jumping robot leg

Jumping robot leg

Ben Katz documented his robotic leg project:

Here are the python scripts that send serial commands to the motor controllers.
Here are the eagle files, gerbers, and BOM for the motor controllers and sensor boards. When I sent the boards to 3PCB, the text the motor controllers got all scrambled so keep that in mind. At this point I’ve built up three of each board, and they all work. I haven’t even blown up a single FET yet, in all of my motor control derping so far.
Here are my CAD files for the motor, gearbox, motor module, and leg. Requires Solidworks 2015-2016 to open. Many of the gearbox files have HSMWorks CAM in them, so you’ll need the full version of HSMWorks to view the CAM. There’s also a list of the gears I got from KHK and the post-machining I did on them.

Full details at BuildIts in Progress blog.

 

Read more Here

 

More Articles to Read

Vertical Pole Climbing Robot
Vertical Pole Climbing Robot
ESP8266 Weather Station Projects
ESP8266 Weather Station Projects
Single tube Lethal Nixie clock
Single tube Lethal Nixie clock
How to make a simple 1 watt audio amplifier (LM386 based)
How to make a simple 1 watt audio amplifier (LM386 based)
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Dot² isn’t your typical coffee table
Dot² isn’t your typical coffee table
Debugging ARM Cortex-M0+ HardFaults
Debugging ARM Cortex-M0+ HardFaults
EMP Jammer build
EMP Jammer build
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!

Top




Shares