Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Arduino Cocktail Maker

Arduino Cocktail Maker

With this project from Pierre Charlier you can easily and cheapily make your own cocktail maker! The cocktail maker is controlled by an Arduino Mega which interfaces between a “drink selection” touch screen and the motors that control the cocktail making! This is a great project to show off to your friends or to learn more about what Arduino is capable of. All of the design files and required code for this project are openly available so there is nothing stopping you making your own! If you want to find out more, check out the following link

You can check the video below to see the cocktail maker in action: 

When building your Arduino cocktail maker you will almost certainly need a H-Bridge motor driver. A H-Bridge allows you to easily control the direction of your motors from within your code.

Read more Here

 

More Articles to Read

A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!
Guide to build your 3.3v power supply
Guide to build your 3.3v power supply
SDR radio breathes life into a 75 year old Marconi CR100
SDR radio breathes life into a 75 year old Marconi CR100
A Time for Ranting!
A Time for Ranting!
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
Emulate a Commodore 64 keyboard with a modern PC and an Arduino
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
USB2005 and USB97C202 Sharing ATA/ATAPI Drive w/ Another Controller
Robotic Cat Laser
Robotic Cat Laser
LED traffic light
LED traffic light
Estimating Power for ADSP-BF561 Blackfin® Processors
Estimating Power for ADSP-BF561 Blackfin® Processors

Top




Shares