Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

300 W General Purpose Wide-range SMPS

300 W General Purpose Wide-range SMPS

The presented evaluation design is a 300 W Switch Mode Power Supply (SMPS) employing the Infineon Combi Controller IC ICE1CS02. The system is partitioned in a Power Factor Correction section (PFC stage) and a Two-Transistor Forward section (TTF stage).

The power supply can be operated from universal input (90 VAC up to 265 VAC at 50~60 Hz) and provides a regulated output of 42 VDC. Alternatively, suggestions are given to obtain 24 VDC or different outputs.

The PFC stage is using Infineon’s high voltage MOSFET 600 V CoolMOS™ C6 and Infineon’s power silicon diode technology, Rapid 2 Diode. To improve efficiency and reduce commutation noise Infineon’s thinQ!™ Generation 5 SiC Schottky Diode can be used. This stage works at a fixed frequency of 65 kHz, both in Discontinued Conduction Mode (DCM) and Continued Conduction Mode (CCM). The TTF stage takes benefit from 500 V CoolMOS™ CE MOSFET family. This stage works at 130 kHz in CCM mode.

This paper describes a detailed application circuit, the design choices, the PCB drawings, the oscilloscope waveforms and the components. Furthermore, magnetics, power losses evaluation in active devices and heatsink design are included.

 

Download Here

 




Top