Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

The real hard drive clock

The real hard drive clock

Hard drive clocks has been around for as long as hard drives has been around. The first ones simply had a disc and the regular hands, the second generation had a whole hard drive and regular hands. Here we take a look on how to build The real hard drive clock. Even though this clock might not fit into every home, it definitely has something about it that makes it nice to look at.
If I say ‘Hard drive clock’ then you’re going to say ‘What’s new about that – it’s been done a million times’.
Yes – but not like this! A normal hard drive clock would be using the disc as background plus the regular hands for hours and minutes, or you could lift the lid of the hard drive and drill a hole all the way through engine and all (kind of) and then mount the regular hands. Boooring!
My goal – a wall clock that only shows pieces from hard drives. No plastic hands here please.
Thanks Joe and Curt for the idea!

Well, with the wonderful bearings in the arms to the heads it shouldn’t be too difficult use the arms as the hands of the clock. So let’s do this!
After taking out two heads I noticed that they’re from two different hardware revisions. One is for three discs and the other is for 4 as you can see on the picture.. I think that will only be cool that they look slightly different.
Needless to say you will need to be careful when handling the heads as the tip will be damaged easily. Cut off the excessive cable piece but be careful so that you don’t damage the wires that go out to the head – it might stop working you know…

I got the clock mechanism from a old clock that I even forgot I had, even though it was hanging in my office. The ring that attaches the ‘item’ to the clock is very small as you can see on the picture. The discs hole is a lot bigger and what better to fill the gap then the original ring that holds down the discs in the hard drive? It’s a bit tricky to centre it but with a bit of patience you’ll manage just fine.

Visit Here for more.







 

More Articles to Read

Skill Sunday: Using Top Loading SD Card Holders
Skill Sunday: Using Top Loading SD Card Holders
DECA MAX®10 FPGA Evaluation Kit
DECA MAX®10 FPGA Evaluation Kit
An Arduino laser pinball machine
An Arduino laser pinball machine
CTCSS fingerprinting: A method for transmitter identification
CTCSS fingerprinting: A method for transmitter identification
TI DLP® Pico™ Technology for Aftermarket Head-up Displays
TI DLP® Pico™ Technology for Aftermarket Head-up Displays
Brute force computation for cheap log digital potentiometer
Brute force computation for cheap log digital potentiometer
Smart "Homer"
Smart "Homer"
A DIY Segway-style vehicle
A DIY Segway-style vehicle
Superbeta transistors inside: Die photos and analysis of the LM108 op amp
Superbeta transistors inside: Die photos and analysis of the LM108 op amp
Peeqo is a desktop bot that communicates through GIFs
Peeqo is a desktop bot that communicates through GIFs

Top


Shares