Organize and Share your Electronics the way you want. Sign-Up for a free account now. It takes only 30 seconds!

Optical output for Creative Infra CD-ROM

Optical output for Creative Infra CD-ROM

This is a little circuit to connect your MD or DAT to your CD-ROM drive with standard optical cable.. Parts cost about 50 FIM. This circuit is tested by me with no problems with locking to signal. Sources were Creative Infra CDROM and Creative Labs AWE32 soundcard. Recording device was SHARP MS-200H Minidisc.
In my computer circuit is powered from free floppydisk powercable (Black ones are GND and Red is +5V). S/PDIF output in AWE is the 0 pin of the S/PDIF connector.

Visit Here for more.

 

More Articles to Read

ESP8266 Weather Station Projects
ESP8266 Weather Station Projects
Single tube Lethal Nixie clock
Single tube Lethal Nixie clock
How to make a simple 1 watt audio amplifier (LM386 based)
How to make a simple 1 watt audio amplifier (LM386 based)
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Flashing Binaries to DRA7xx Factory Boards Using Device Firmware Upgrade
Dot² isn’t your typical coffee table
Dot² isn’t your typical coffee table
Debugging ARM Cortex-M0+ HardFaults
Debugging ARM Cortex-M0+ HardFaults
EMP Jammer build
EMP Jammer build
A 3D-printed e-drum pad
A 3D-printed e-drum pad
Interactive geodesic LED dome = extreme geometric fun!
Interactive geodesic LED dome = extreme geometric fun!
Guide to build your 3.3v power supply
Guide to build your 3.3v power supply

Top




Shares