Browse over 10,000 Electronics Projects using the Page Numbering provided at the bottom of each Page.

Poor Man’s DDS Synthesizer

Poor Man’s DDS Synthesizer

A very simple version of the DDS synth, using just the 2313 and a resistor network. This does not use chip from Analog Device. It’s controlled over RS232 from a small Windows program, and can generate Sine-, Sawtooth-, Trangle- and Sqare-waves ranging from 0.07 Hz to about 200-300 kHz in 0.07 Hz steps.

A voltage regulator/switch, a RS232 interface chip, the 2313 and the R2R resistor network. The R2R network is connected to PORTB on the 2313, making it a simple D/A converter and makes it possible to output 256 voltage levels. Neither the resistor network or port drivers of the 2313 is of perfect linearity, but it works pretty well anyway. But you’ll probably need a buffer stage as the output impedance is rather high (tens of kOhms in my case).
The MAX603 handles the voltage regulation as well as the powerup/shutdown function, and is controlled by the DTR signal on the serial interface. So when you shut down the control program on the PC, the miniDDS will be shutdown, saving battery.

Visit Here for more.

 

Top