A fun way to water proof your pen drive. Its very simple and looks cool when finished, Be sure to look at the picture notes for important info.The piece of plastic used was a syringe cap from one of my dads needles
You will need:
Old Mag Light:
1 AA Battery:
Small piece of plastic that fits inside the mag light.:
Needle nose pliers:
Hot Glue gun:
not sure how many know this, but there is a spare bulb in the bottom of the light’s cap. To get it all you must do is pull the spring off with pliers and the thing should fall out if tipped up side down.:
To get the “thing” out all you do is take a small flat head screw driver and pry them apart. There’s is two parts to the “thing” one should fall out the back of the light. Save these::
. Get you battery, THING, and small piece of plastic.::
. The piece of plastic I used was a syringe cap from one of my dads needles (diabetic).
Visit Here for more.