PCB Analyzer
Catch PCB manufacturing issues before fabrication
Unlimited
Free PCB Checklist
5 questions covering the most common PCB manufacturing issues.
1. What is the minimum trace width in your design?
ℹ️ Most PCB fabs require ≥ 0.1mm; 0.2mm recommended for reliable yield.
2. What is the smallest via drill size?
ℹ️ Standard via drill: 0.3mm min. Microvias (HDI) require special pricing.
3. Do any silkscreen labels overlap pads or component bodies?
ℹ️ Silkscreen on pads causes soldering defects. Clearance ≥ 0.1mm required.
4. What is the board-edge clearance for the nearest copper?
ℹ️ Minimum 0.3mm from board edge to copper recommended for V-score routing.
5. Are all SMD components 0402 or larger?
ℹ️ 0402 is standard. 0201 and smaller require fine-pitch assembly (higher cost).
Full Automated PCB Report
Upload your KiCad or EasyEDA JSON file for a complete PCB analysis across 30+ checks: trace widths, via annular rings, silkscreen, solder mask expansion, and more.
KiCad / EasyEDA JSON file upload
Unlock with Starter plan — $19/month