Will It Work? · Guide

Guest Wi-Fi and IoT network: what each one allows

By , founder of ElectronicsInfoline (since 2000)

A home router can run more than one Wi-Fi network: the main one, a guest network for visitors, and on many models an IoT network for smart plugs, lights and cameras. They look alike in the Wi-Fi list but behave differently. What each one allows comes from a router maker's user guide and support pages, read on its US and India sites.

Put visitors on the guest network with both permission boxes unticked: they get the internet and nothing else. Put smart plugs and cameras on a 2.4 GHz IoT network. That one helps setup and keeps them on their own name, but it still talks to your main network by default.

Three networks on one router

The guest network gives visitors Wi-Fi without disclosing your main network (TP-Link). The IoT network is a separate network for managing smart lights, cameras and similar devices together (TP-Link)(TP-Link), and runs separately from the main Wi-Fi (TP-Link). Not every router has one: some models supplied by internet providers lack the IoT network (TP-Link)(TP-Link).

Who can reach whom with the guest boxes left untickedThe router feeds three networks. The guest network reaches the internet only: no line to the main network, and guests cannot reach each other. The IoT network is a separate name for smart-home devices, but it talks to the main network by default unless device isolation is turned on.InternetRouterMain networkcomputer, printerGuest networkvisitor phonesIoT networkplugs, camerasblockedIoT and main: talk by defaultguests: internet only
Figure 1. With both guest boxes unticked, visitors get the internet and nothing else. The IoT network is different: the maker says it allows cross-network communication by default, so it puts smart-home devices on their own name and band while they can still reach the main network.

The two guest boxes

The guest network settings have two boxes. Allow guests to see each other lets devices on the guest network talk to each other, for example through network neighbours and ping. Allow guests to access your local network lets them reach devices on the router's LAN ports or main network (TP-Link). The second box opens your local network to guests, not just the internet (TP-Link)(TP-Link).

The two guest network boxes and what each setting allowsSee each other no, access local network no: guests reach each other no, reach the main network no. See each other yes, access local network no: guests reach each other yes, reach the main network no. See each other no, access local network yes: guests reach each other no, reach the main network yes. See each other yes, access local network yes: guests reach each other yes, reach the main network yes.Box ticked?Guests reacheach otherGuests reachmain networkSee each other: noAccess local network: nononoSee each other: yesAccess local network: noyesnoSee each other: noAccess local network: yesnoyesSee each other: yesAccess local network: yesyesyes
Figure 2. The first box opens guest devices to each other; the second opens your main network and the router's wired ports to them. Leave both unticked unless a guest needs one, then tick only that box.

With both unticked, a guest phone reaches the internet and nothing else on your network. Some routers also let you set how much bandwidth guests get (TP-Link), which helps if a visitor starts a big download.

The IoT network: a separate name, not a wall

Most smart-home devices only work on 2.4 GHz, and their setup apps need your phone on the same band. When one network name covers both 2.4 and 5 GHz, the phone often joins 5 GHz and setup fails; an IoT network on 2.4 GHz keeps both on the same band (TP-Link)(TP-Link). A 5 GHz IoT network is an option only if the device can join 5 GHz (TP-Link).

One network name for both bands vs a 2.4 GHz IoT networkLeft: one name covers 2.4 and 5 GHz, the phone joins 5 GHz, and the plug, which only works on 2.4 GHz, fails to set up because its app needs the phone on the same band. Right: a separate IoT network on 2.4 GHz puts the phone and the plug on the same band, and setup works.One name, both bandsPhonejoined 5 GHzPlug2.4 GHz onlysetup fails2.4 GHz IoT networkPhone2.4 GHzPlug2.4 GHz onlysetup worksA 5 GHz IoT network only if the device lists 5 GHz.
Figure 3. Most smart-home devices only work on 2.4 GHz, and their setup apps want the phone on the same band. A separate 2.4 GHz IoT network makes sure both are.

The IoT network does not shut smart devices away from your computers. The maker's mesh help page says it allows cross-network communication by default, so phone apps and smart-home hubs on the main network can still find the devices; it points to a per-device isolation switch for cutting one off (TP-Link)(TP-Link). Isolating a device may stop your phone from controlling it at home, so check after you switch it on.

Which device goes on which network

DeviceNetworkWhy
Visitors' phones and laptopsGuest, both boxes untickedInternet only; your computers and printer stay out of reach.
Smart plugs, bulbs, cameras, sensorsIoT, 2.4 GHzMost work only on 2.4 GHz; setup goes smoothly on one band.
Your own computers, phones, TV, storageMainFull use of both bands and the wired ports.

To check which bands your router has and what each one carries, see Wi-Fi bands explained.

Passwords and security

Both the guest and IoT networks let you pick no security, which means no password at all (TP-Link). The maker's guest network guide sets WPA/WPA2 Personal with a password instead (TP-Link). If a smart plug will not join, check which security modes its spec page lists; for what each setting means, see WPA2 vs WPA3.

Tips and tricks

  • Turn the guest network on when visitors arrive and off when they leave; the router’s guest settings have an enable switch for each band.
  • Give the guest network a name visitors cannot mix up with yours, so nobody joins the main network by mistake.
  • Set a smart plug up on the 2.4 GHz IoT network with your phone joined to the same network. If the app still insists on 2.4 GHz, forget the main network on the phone while you set it up.
  • Tick “allow guests to see each other” only when visitors need it, for example two of their own devices that must find each other, and untick it afterwards.
  • If you isolate a smart device, check that your phone app can still control it at home before you leave it that way.

What we would do

We would set up a guest network with a password and both permission boxes unticked, and give its details to visitors instead of the main password. We would put smart plugs, bulbs and cameras on a 2.4 GHz IoT network if the router has one. We would keep in mind that devices on the IoT network can still reach the main network, and use per-device isolation only for a device we did not need to reach from home.

Questions people ask

Can guests on my guest Wi-Fi see my computers? Not unless you allow it. A router guest network has a box called "allow guests to access my local network". Leave it unticked and guests get the internet, not the devices on your main network or the router’s wired ports.

Should my smart plugs go on the guest network? Usually not. A guest network is for visitors. Many routers have a separate IoT network for smart lights, plugs and cameras, and most of those devices only work on 2.4 GHz. Put them there, or on the main network if your router has no IoT network.

Does an IoT network keep smart devices away from my computers? Not on its own. The maker’s mesh help page says the IoT network allows cross-network communication by default. It gives smart devices their own name and band; to block one device from the rest, the same page points to Device Isolation.

Why does my smart plug say "connect to a 2.4 GHz network"? Its setup app wants your phone on the same band as the plug, and most plugs only work on 2.4 GHz. If one Wi-Fi name covers both bands, the phone often joins 5 GHz and setup fails. A 2.4 GHz IoT network fixes that.

Should a guest network have a password? Yes. The router lets you choose no security, which means no password at all. The maker’s guide sets it to WPA/WPA2 Personal with a password; use WPA3 if every guest device supports it.

Sources

Each figure on this page is quoted from the source below or worked out from them. Sources checked , each quote read again against the source in a second pass.

  1. TP-Link, TP-Link Archer C80 user guide (US), chapter 6: guest network: This function allows you to provide Wi-Fi access for guests without disclosing your main network. tp-link.com/us/user-guides/archer-c80_v1/chapter-6-guest-net…
  2. TP-Link, TP-Link Archer C80 user guide (US): guest permissions: Allow guests to see each other Tick this checkbox if you want to allow the wireless clients on your guest network to communicate with each other via methods such as network neighbors and Ping. • Allow guests to access your local network Tick this checkbox if you want to allow the wireless clients on your guest network to communicate with the devices connected to your router's LAN ports or main network via methods such as network neighbors and Ping. tp-link.com/us/user-guides/archer-c80_v1/chapter-6-guest-net…
  3. TP-Link, TP-Link Archer C80 user guide (US): guest network security choice: If No security is selected, no password is needed to access your guest network. • If WAP/WPA2-Personal is selected, customize your own password. tp-link.com/us/user-guides/archer-c80_v1/chapter-6-guest-net…
  4. TP-Link, TP-Link FAQ 1492 (US): guest network on cable modem routers: Allow guests to see each other Select this checkbox to allow the clients in your guest network to access each other. • Allow guests to access my local network Select this checkbox to allow the clients in your guest network to access your local network, not just Internet access. tp-link.com/us/support/faq/1492/
  5. TP-Link, TP-Link FAQ 1492 (India): guest network settings: Allow guests to see each other Select this checkbox to allow the clients in your guest network to access each other. • Allow guests to access my local network Select this checkbox to allow the clients in your guest network to access your local network, not just Internet access. tp-link.com/in/support/faq/1492/
  6. TP-Link, TP-Link FAQ 1492 (India): guest network security and bandwidth: you can assign network authorities and bandwidth for guests to ensure network security, privacy, and fluency. tp-link.com/in/support/faq/1492/
  7. TP-Link, TP-Link FAQ 1492 (India): guest network security setting: Set Security to WPA/WPA2 Personal , keep the default Version and Encryption values, and set an easy-to-remember password. tp-link.com/in/support/faq/1492/
  8. TP-Link, TP-Link FAQ 3775 (US): IoT network on a TP-Link wireless router: This router can create a dedicated wireless network for you to manage your IoT devices together, such as smart lights and cameras, enhancing their connection stability. tp-link.com/us/support/faq/3775/
  9. TP-Link, TP-Link FAQ 3775 (India): IoT network on a TP-Link wireless router: This router can create a dedicated wireless network for you to manage your IoT devices together, such as smart lights and cameras, enhancing their connection stability. tp-link.com/in/support/faq/3775/
  10. TP-Link, TP-Link FAQ 3775 (India): IoT network bands: Tick the Enable checkbox for the 2.4GHz or 5 GHz wireless network. For the 5 GHz network, make sure your IoT devices can connect to a 5 GHz network. tp-link.com/in/support/faq/3775/
  11. TP-Link, TP-Link FAQ 4420 (US): smart home devices on a mesh network: Most IoT devices only work on 2.4GHz, and their setup apps require your phone to be on the same band. But Deco mesh uses one Wi-Fi name for both 2.4GHz and 5GHz, so your phone often connects to 5GHz, causing setup failures. An IoT Network solves this by keeping everything on the same 2.4GHz Wi-Fi. tp-link.com/us/support/faq/4420/
  12. TP-Link, TP-Link FAQ 4420 (India): smart home devices on a mesh network: Smart home devices (also called IoT devices), such as cameras, lights, and sensors, often only support 2.4GHz Wi-Fi and can't roam between mesh nodes. tp-link.com/in/support/faq/4420/
  13. TP-Link, TP-Link FAQ 4420 (US): IoT network talks to the main network by default: The IoT Network allows cross-network communication by default. Ensure Device Isolation is off for the device in Deco app ( Security > Device Isolation ). tp-link.com/us/support/faq/4420/
  14. TP-Link, TP-Link FAQ 4420 (India): IoT network talks to the main network by default: The IoT Network allows cross-network communication by default. Ensure Device Isolation is off for the device in Deco app ( Security > Device Isolation ). tp-link.com/in/support/faq/4420/
  15. TP-Link, TP-Link FAQ 4940 (US): IoT network on ISP-customised routers: Some ISP-Customized Router models may not support the IoT Network feature. Ensure that your router model and firmware version include this feature. Q2: Will enabling an IoT Network affect devices on my main network? A2: No. The IoT Network operates separately from the main Wi-Fi, helping you organize and manage IoT traffic without affecting other devices. tp-link.com/us/support/faq/4940/
  16. TP-Link, TP-Link FAQ 4940 (India): IoT network on ISP-customised routers: Some ISP-Customized Router models may not support the IoT Network feature. Ensure that your router model and firmware version include this feature. Q2: Will enabling an IoT Network affect devices on my main network? A2: No. The IoT Network operates separately from the main Wi-Fi, helping you organize and manage IoT traffic without affecting other devices. tp-link.com/in/support/faq/4940/

Author: Bulan Sarkar · Report an error

Numbers here are quoted from standards bodies and makers, or worked out from them. Nothing on this page was measured or tested by us.