Will It Work? · Guide
Samsung Super fast charging: what the charger label needs
By Bulan Sarkar, founder of ElectronicsInfoline (since 2000)
Galaxy phones name three wired fast-charging tiers: Super fast charging, Super fast charging 2.0 and Super fast charging 3.0. Each one needs a charger that lists the right lines on its label, a cable that can carry them, and a phone that supports the tier. This guide reads all three from Samsung's own help page (the India page; Samsung notes its chargers may vary by country) and shows how to compare a charger label against them.
Super fast charging needs USB PD with PPS; a high wattage on its own isn't enough. Samsung's own chargers for the three tiers list PPS up to 24.75 W (25 W charger), 45 W (45 W, SFC 2.0, 5 A cable or the 3 A cable in the box on S25 and later) and 60 W (60 W, SFC 3.0, 3 A cable). Your phone has to support the tier.
PPS comes first, then the watts
Samsung's page says that to use Super fast charging, you check not only the charger's power output but also whether it supports USB PD PPS (Programmable Power Supply). Even a charger with a high maximum output may not give Super fast charging if it doesn't support PPS (Samsung).
PPS shows on a label as a range rather than one voltage, such as 3.3–11 V. A label with only fixed lines (5 V, 9 V, 15 V, 20 V) has no PPS. Our guide to USB PD and PPS explains the difference.
The three tiers, as charger labels
Samsung lists the lines its own wired chargers give in their fast mode (Samsung):
- Super fast charging, 25 W charger: fixed 9 V at 2.77 A; PPS 3.3–5.9 V at 3 A and 3.3–11 V at 2.25 A.
- Super fast charging 2.0, 45 W charger: fixed 9 V and 15 V at 3 A, 20 V at 2.25 A; PPS 5–20 V at 2.25 A.
- Super fast charging 3.0, 60 W charger: fixed 9 V, 15 V and 20 V at 3 A; PPS 5–20 V at 3 A.
Volts × amps gives the top of each PPS range: 11 × 2.25 = 24.75 W, 20 × 2.25 = 45 W and 20 × 3 = 60 W. The 25 W charger's fixed line works out to 9 × 2.77 = 24.93 W. These are what the charger can offer, not what the phone draws; Samsung says the maximum charging current changes with the battery level (Samsung).
Which tier your phone supports is on its own spec page. Samsung says the supported version may vary with the charger and the Galaxy model (Samsung), so check both: the charger's lines and the phone's tier.
The cable
Samsung bases Super fast charging 2.0 on a 45 W, 5 A cable. For Galaxy S25 and later it says the 3 A cable in the box does the job. Super fast charging 3.0 is based on a 60 W, 3 A cable (Samsung).
A cable below what the charger needs can hold it back: Samsung says the charger may then not deliver its maximum, and that some third-party cables with higher resistance can make charging stop now and then (Samsung). To check what a cable is rated for, read its logo with our USB-C cable checker.
Checking another charger’s label
Samsung's page covers its own chargers and says nothing about other brands. What you can do is compare a label's PPS range with the PPS lines on Samsung's charger for each tier. A range that starts as low, goes as high and carries as many amps covers that line. A label with PPS 3.3–11 V at 3 A covers the 25 W charger's lines but not 5–20 V × 2.25 A, the 45 W charger's PPS line.
A match of printed lines is the most a label can tell you; it isn't a promise from the phone maker. For a yes or no on your own setup, enter the label in the phone fast-charge checker, and for multi-port chargers see how the watts are shared: on Samsung's own, the 2.0 mode works only on port 1 with nothing else plugged in.
The setting, and what else slows it
Fast charging has a switch: Settings > Battery > Charging settings > Fast charging. On the Galaxy S23 series and later, Fast charging and Super fast charging sit under that single switch (Samsung). It does not work from a PC or a standard USB port. Samsung also says that turning the phone off, or keeping the screen off, helps it charge at its fastest (Samsung).
Tips and tricks
- Look for a PPS range on the charger label before you look at the watts.
- Check your phone’s spec page for the tier it supports; the charger alone doesn’t decide it.
- On a Galaxy S25 or later, the 3 A cable from the box is the one Samsung names for 2.0.
- On a multi-port Samsung charger, use port 1 alone for the 2.0 mode.
- Not charging fast? Check the Fast charging switch under Settings > Battery > Charging settings.
What we would do
Find your phone's tier on its spec page first. For the first tier, look for a PPS range that covers both lines Samsung lists for its own 25 W charger: 3.3–5.9 V at 3 A and 3.3–11 V at 2.25 A. For 2.0 or 3.0, look for a PPS range from 5 V or lower up to 20 V at the amps in that tier's line, and a cable rated for the tier. Then switch Fast charging on.
Run your charger and cable through the phone fast-charge checker for the working.
Questions people ask
Why doesn’t my Galaxy show Super fast charging on a 65 W charger? Check for PPS first. Samsung says to check not only the charger’s output but whether it supports USB PD PPS, and that a high-output charger without PPS may not give Super fast charging. Look for a PPS line on the label. The cable and the port can matter too.
What does a charger need for 25 W Super fast charging? USB PD with PPS. Samsung’s own 25 W charger lists PPS 3.3–5.9 V at 3 A and 3.3–11 V at 2.25 A, plus a fixed 9 V at 2.77 A.
What does Super fast charging 2.0 need? A charger with PPS up to 20 V: Samsung’s 45 W charger lists PPS 5–20 V at 2.25 A, and the tier is based on a 45 W, 5 A cable. For Galaxy S25 and later, Samsung says the 3 A cable in the box is enough. Your phone has to support this tier.
What does Super fast charging 3.0 need? Samsung’s 60 W charger lists PPS 5–20 V at 3 A, and the tier is based on a 60 W, 3 A cable. Your phone has to support this tier.
Sources
Each figure on this page is quoted from the source below or worked out from them. Sources checked , each quote read again against the source in a second pass.
- Samsung, How to enable Fast charging and Fast wireless charging on your Samsung Galaxy phone | Samsung India:
Fast charging does not activate when connecting your Galaxy smartphone to a PC or standard USB port. ... On Galaxy S23 series models and later, Fast charging and Super fast charging settings are unified under the single Fast charging toggle. ... Step 1 . Open Settings > Tap Battery . Step 2 . Tap Charging settings . Step 3 . Tap the switch next to Fast charging or Fast wireless charging to turn the feature on. ... Note : To use Super fast charging, check not only the charger’s power output but also whether it supports USB PD (Power Delivery) PPS (Programmable Power Supply). Even if a charger has a high maximum output, Super fast charging may not be available if the charger does not support PPS. ... Cable requirements vary depending on the charger’s maximum charging output. If the cable does not meet the required USB charging specifications, the charger may not be able to deliver its maximum charging output. Some third-party cables that do not meet the required charging specifications may have higher electrical resistance, which can cause charging to stop intermittently. ... EP-T2510 (25W PD charger) Maximum output voltage/current (Super fast charging) PDO: 9V / 2.77A PPS: 3.3–5.9V / 3A, 3.3–11.0V / 2.25A Super fast charging ... EP-T4511 (45W PD charger) Maximum output voltage/current (Super fast charging) PDO: 9V, 15V / 3A, 20V / 2.25A PPS: 5–20V / 2.25A Super fast charging 2.0 Based on use with a 45W, 5A cable. For Galaxy S25 and later models, SFC 2.0 is supported when using the 3A USB cable included with the device. ... EP-T6010 (60W PD charger) Maximum output voltage/current (Super fast charging) PDO: 9V, 15V, 20V / 3A PPS: 5–20V / 3A Super fast charging 3.0 Based on use with a 60W, 3A cable. ... EP-T5020 (50W dual-port PD charger) Maximum output voltage/current (Super fast charging) [USB-C1] PDO: 9V, 15V / 3A, 20V / 2.5A PPS: 5–20V / 2.5A [USB-C2] PDO: 9V / 2.77A PPS: 5–11V / 2.25A Super fast charging 2.0 Based on use with a 45W, 5A cable. Supported only when connected to Port 1. Not supported when two or more ports are connected. ... EP-T6530 (65W trio-port PD charger) Maximum output voltage/current (Super fast charging) [USB-C1] PDO: 9V, 15V / 3A, 20V / 3.25A PPS: 5–11V / 3.5A, 5–16V / 2.8A, 5–20V / 2.25A [USB-C2] PDO: 9V / 2.77A PPS: 5–5.9V / 3A, 5–11V / 2.25A [USB-A] 9V / 1.67A Super fast charging 2.0 Based on use with a 45W, 5A cable. Supported only when connected to Port 1. Not supported when two or more ports are connected. ... Note : Model names may vary by country. ... Official Samsung chargers may vary by country. ... Turning off your Galaxy phone or keeping the screen off during charging helps maximise charging speeds. ... Fast charging or Super fast charging may not be supported depending on the charger and Galaxy model, and the supported version of Super fast charging may vary. ... The maximum charging current varies depending on the remaining battery level of the Galaxy device.
samsung.com/in/support/mobile-devices/enable-fast-charging-a…