Will It Work? · Guide

Wi-Fi 4, 5, 6, 6E and 7: what each generation name means

By , founder of ElectronicsInfoline (since 2000)

A router box says Wi-Fi 6, the laptop's spec sheet says 802.11ax, and the phone settings say Wi-Fi 5. Those are two naming schemes for the same thing. This guide lines up each generation name with its IEEE standard, its year and its bands, using only what the Wi-Fi Alliance publishes.

Wi-Fi 4 is 802.11n (2009), Wi-Fi 5 is 802.11ac (2014), Wi-Fi 6 is 802.11ax (2018), Wi-Fi 6E is the same 802.11ax extended into 6 GHz (named 2020), and Wi-Fi 7 is 802.11be (2024). All of them use 2.4 GHz and 5 GHz; only 6E and 7 add the 6 GHz band, and Wi-Fi 7's widest 320 MHz channels exist there only.

The name on the box and the standard behind it

On 3 October 2018 the Wi-Fi Alliance brought in “Wi-Fi 6” as the name for products based on 802.11ax (Wi-Fi Alliance), and gave the two before it numbers too: Wi-Fi 5 for 802.11ac and Wi-Fi 4 for 802.11n (Wi-Fi Alliance). The point was a plain name for what a device supports and what a connection uses (Wi-Fi Alliance). Wi-Fi 7 is IEEE 802.11be (Wi-Fi Alliance).

The Wi-Fi Alliance dates the generations to 2009 for Wi-Fi 4 (Wi-Fi Alliance), 2014 for Wi-Fi 5 (Wi-Fi Alliance), 2018 for Wi-Fi 6 (Wi-Fi Alliance) and 2024 for Wi-Fi 7 (Wi-Fi Alliance). Wi-Fi 6E got its name in January 2020 (Wi-Fi Alliance). Wi-Fi 8 is announced as the next generation (Wi-Fi Alliance).

Wi-Fi generations from Wi-Fi 4 to Wi-Fi 7 on a timelineWi-Fi 4 = IEEE 802.11n, introduced 2009; Wi-Fi 5 = IEEE 802.11ac, introduced 2014; Wi-Fi 6 = IEEE 802.11ax, introduced 2018; Wi-Fi 6E = IEEE 802.11ax, name announced 2020; Wi-Fi 7 = IEEE 802.11be, introduced 20242010201520202025Wi-Fi 4802.11n2009Wi-Fi 5802.11ac2014Wi-Fi 6802.11ax2018Wi-Fi 6E802.11ax2020, nameWi-Fi 7802.11be2024green: lists the 6 GHz band
Figure 1. The name on the box and the IEEE standard behind it. Wi-Fi 6E is Wi-Fi 6 (802.11ax) extended into 6 GHz; its year is when the name was announced.

Which bands each generation uses

The 2.4 GHz and 5 GHz bands were the ones available before Wi-Fi 6 reached into 6 GHz (Wi-Fi Alliance). Most Wi-Fi 5 products are dual-band, on both 2.4 GHz and 5 GHz (Wi-Fi Alliance). The 6 GHz band came under the name Wi-Fi 6E: Wi-Fi 6 features extended into 6 GHz (Wi-Fi Alliance). Wi-Fi 7 works across all three, 2.4, 5 and 6 GHz (Wi-Fi Alliance).

So a plain “Wi-Fi 6” router and a “Wi-Fi 6E” router run the same standard, and the difference is the 6 GHz radio. For a 6 GHz connection both the router and the device must list 6 GHz, and your country must allow it; see what each Wi-Fi band is for.

Which Wi-Fi bands each generation usesWi-Fi 4: 2.4 GHz, 5 GHz; Wi-Fi 5: 2.4 GHz, 5 GHz; Wi-Fi 6: 2.4 GHz, 5 GHz; Wi-Fi 6E: 2.4 GHz, 5 GHz, 6 GHz; Wi-Fi 7: 2.4 GHz, 5 GHz, 6 GHzGeneration2.4 GHz5 GHz6 GHzWi-Fi 4802.11n–Wi-Fi 5802.11ac–Wi-Fi 6802.11ax–Wi-Fi 6E802.11axWi-Fi 7802.11beMost Wi-Fi 5 products are dual-band.
Figure 2. 2.4 GHz and 5 GHz run through every generation; 6 GHz arrives with Wi-Fi 6E and stays in Wi-Fi 7. A 6 GHz link needs both ends to list 6 GHz, and the country to allow it.

What Wi-Fi 6 and Wi-Fi 7 added

Wi-Fi 6 brought OFDMA, which shares a channel between devices, and target wake time, which the Wi-Fi Alliance links to device battery life (Wi-Fi Alliance). It can use channels up to 160 MHz wide (Wi-Fi Alliance).

Wi-Fi 7 doubles that to 320 MHz channels, available in the 6 GHz band, which the Wi-Fi Alliance says gives twice the throughput of Wi-Fi 6 (Wi-Fi Alliance). It adds multi-link operation, which balances traffic across links (Wi-Fi Alliance), and 4K QAM, with 20% higher transmission rates than Wi-Fi 6's 1024 QAM (Wi-Fi Alliance). The 320 MHz channels need 6 GHz, so a Wi-Fi 7 router on 2.4 GHz and 5 GHz alone cannot use them.

Widest Wi-Fi channel: Wi-Fi 6 against Wi-Fi 7Wi-Fi 6 can use 160 MHz channels; Wi-Fi 7 adds 320 MHz channels, available in the 6 GHz band only. 4K QAM in Wi-Fi 7 gives 20% higher transmission rates than Wi-Fi 6's 1024 QAM.Wi-Fi 6160 MHzwidest channel named for Wi-Fi 6Wi-Fi 7320 MHz6 GHz band onlyWi-Fi 7 also adds 4K QAM: 20% higher rates than 1024 QAM
Figure 3. A wider channel carries more data at once. Wi-Fi 7's 320 MHz channels exist only in 6 GHz, so a router without 6 GHz, or a country with only the lower 6 GHz band, limits what you get.

Old and new devices on one network

Wi-Fi CERTIFIED 7 testing includes backward compatibility: new products are tested with earlier generations of Wi-Fi equipment (Wi-Fi Alliance). In practice a Wi-Fi 5 laptop joins a Wi-Fi 7 router on 2.4 GHz or 5 GHz, the bands both list, as a Wi-Fi 5 device. The newer features and the 6 GHz band are there for the devices that support them.

The other way round works too: a new Wi-Fi 7 phone on an old Wi-Fi 5 router connects, but only with what the router offers.

Wi-Fi 7 on the box, or the certified seal

The Wi-Fi Alliance points out that seeing “Wi-Fi 7” on a box or website is not the same as its Wi-Fi CERTIFIED 7 seal (Wi-Fi Alliance). A maker may claim 802.11be or Wi-Fi 7 without completing certification (Wi-Fi Alliance). To check a model, look it up in the Wi-Fi Alliance Product Finder (Wi-Fi Alliance).

Tips and tricks

  • Spec sheets often print only the letters. 802.11n, ac, ax and be are Wi-Fi 4, 5, 6 and 7.
  • Wi-Fi 6E and Wi-Fi 6 both say 802.11ax. The E is the 6 GHz band; look for "6 GHz" in the band list to tell them apart.
  • The names describe a connection as well as a device. A Wi-Fi 6 laptop and a Wi-Fi 5 router still talk over Wi-Fi 5.
  • Wi-Fi 7's 320 MHz channels are a 6 GHz feature. A router or country without 6 GHz leaves that out.
  • Check the model in the Wi-Fi Alliance Product Finder before buying on a "Wi-Fi 7" claim alone.

What we would do

Read the band list as closely as the generation. If your phones and laptops list 6 GHz, a router that lists 6 GHz too (Wi-Fi 6E or 7) lets them use it. If none of your devices list 6 GHz, they will stay on 2.4 GHz and 5 GHz whatever the router offers. Before you buy, look the model up in the Product Finder.

Next, see 2.4 vs 5 vs 6 GHz for what each band is for and where 6 GHz is open. To keep the router running through a power cut, use the power-cut backup calculator.

Questions people ask

Is Wi-Fi 6 the same as 802.11ax? Yes. When the Wi-Fi Alliance brought in the numbered names in 2018, it set Wi-Fi 6 for devices that support 802.11ax, Wi-Fi 5 for 802.11ac and Wi-Fi 4 for 802.11n. Wi-Fi 7 is IEEE 802.11be.

What is the difference between Wi-Fi 6 and Wi-Fi 6E? Wi-Fi 6E is Wi-Fi 6 extended into the 6 GHz band. Its standard is the same 802.11ax. A Wi-Fi 6 router without the E works on 2.4 GHz and 5 GHz only.

Does a Wi-Fi 7 router work with older phones and laptops? Wi-Fi CERTIFIED 7 testing covers backward compatibility: new products are tested with earlier generations of Wi-Fi equipment. An older device joins on a band it supports (2.4 GHz or 5 GHz) using its own generation.

Does "Wi-Fi 7" on the box mean the router is certified? No. The Wi-Fi Alliance says a "Wi-Fi 7" claim on a box is not the same as its Wi-Fi CERTIFIED 7 seal, and a maker can claim 802.11be or Wi-Fi 7 without certification. You can check a model in the Wi-Fi Alliance Product Finder.

What does Wi-Fi 7 add over Wi-Fi 6? 320 MHz channels in the 6 GHz band (Wi-Fi 6 goes up to 160 MHz), multi-link operation, which spreads traffic across links, and 4K QAM, which the Wi-Fi Alliance puts at 20% higher transmission rates than Wi-Fi 6's 1024 QAM.

Sources

Each figure on this page is quoted from the source below or worked out from them. Sources checked , each quote read again against the source in a second pass.

  1. Wi-Fi Alliance, Wi-Fi Alliance press release, 3 Oct 2018: Wi-Fi Alliance introduces Wi-Fi 6: Wi-Fi 6 to identify devices that support 802.11ax technology Wi-Fi 5 to identify devices that support 802.11ac technology Wi-Fi 4 to identify devices that support 802.11n technology wi-fi.org/news-events/newsroom/wi-fi-alliance-introduces-wi-…
  2. Wi-Fi Alliance, Wi-Fi Alliance press release, 3 Oct 2018: Wi-Fi Alliance introduces Wi-Fi 6: Wi-Fi 6 is part of a new naming approach by Wi-Fi Alliance that provides users with an easy-to-understand designation for both the Wi-Fi technology supported by their device and used in a connection the device makes with a Wi-Fi network. wi-fi.org/news-events/newsroom/wi-fi-alliance-introduces-wi-…
  3. Wi-Fi Alliance, Wi-Fi Alliance press release, 3 Oct 2018: Wi-Fi Alliance introduces Wi-Fi 6: October 3, 2018 – Wi-Fi Alliance® introduces Wi-Fi 6 as the industry designation for products and networks that support the next generation of Wi-Fi®, based on 802.11ax technology. wi-fi.org/news-events/newsroom/wi-fi-alliance-introduces-wi-…
  4. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: Wi-Fi 4 was introduced in 2009 wi-fi.org/wi-fi-macphy
  5. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: Wi-Fi 5 was introduced in 2014 and offers higher capacity, improved power management, and lower latency, delivering multi-gigabit per second data rates wi-fi.org/wi-fi-macphy
  6. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: Most Wi-Fi 5 products are dual-band, operating in both the 2.4 GHz and 5 GHz bands. Dual-band networks double capacity because devices can use the less crowded 5 GHz band for high performance applications, and the 2.4 GHz band for basic needs such as web surfing and IoT applications. wi-fi.org/wi-fi-macphy
  7. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: Introduced in 2018, Wi-Fi 6 delivers higher data rates, greater capacity, stronger performance in dense environments, and improved power efficiency wi-fi.org/wi-fi-macphy
  8. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: Wi‑Fi 6 also introduced Wi‑Fi in the 6 GHz band in addition to the 2.4 GHz and 5 GHz bands available in previous generations wi-fi.org/wi-fi-macphy
  9. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: 160 MHz channel utilization capability increases bandwidth to deliver greater performance with low latency wi-fi.org/wi-fi-macphy
  10. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: Orthogonal frequency division multiple access (OFDMA) effectively shares channels to increase network efficiency and lower latency ... Target wake time (TWT) significantly improves network efficiency and device battery life wi-fi.org/wi-fi-macphy
  11. Wi-Fi Alliance, Wi-Fi Alliance press release, 3 Jan 2020: Wi-Fi 6E for 6 GHz: Wi-Fi 6E brings a common industry name for Wi-Fi® users to identify devices that will offer the features and capabilities of Wi-Fi 6 – including higher performance, lower latency, and faster data rates – extended into the 6 GHz band. wi-fi.org/news-events/newsroom/wi-fi-alliance-brings-wi-fi-6…
  12. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: Introduced in 2024, Wi-Fi 7 enhances performance across the 2.4 GHz, 5 GHz, and 6 GHz bands wi-fi.org/wi-fi-macphy
  13. Wi-Fi Alliance, Wi-Fi Alliance blog, 5 Aug 2026: Buying a Wi-Fi 7 router? Here is what matters.: A manufacturer may indicate support for IEEE 802.11be or Wi-Fi 7 without completing Wi-Fi Alliance certification. wi-fi.org/beacon/jeff-platon/buying-wi-fi-7-router-here-what…
  14. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: 320 MHz channels available in the 6 GHz band provide twice the throughput of Wi-Fi 6, enabling multigigabit Wi-Fi device speeds wi-fi.org/wi-fi-macphy
  15. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: Multi-link operation supports more efficient load balancing of traffic among links, resulting in increased throughput and enhanced reliability wi-fi.org/wi-fi-macphy
  16. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: 4K quadrature amplitude modulation mode (4K QAM) achieves 20% higher transmission rates than Wi-Fi 6’s 1024 QAM for greater efficiency wi-fi.org/wi-fi-macphy
  17. Wi-Fi Alliance, Wi-Fi Alliance blog, 5 Aug 2026: Buying a Wi-Fi 7 router? Here is what matters.: Backward compatibility: New products are tested for compatibility with earlier generations of Wi-Fi equipment wi-fi.org/beacon/jeff-platon/buying-wi-fi-7-router-here-what…
  18. Wi-Fi Alliance, Wi-Fi Alliance blog, 5 Aug 2026: Buying a Wi-Fi 7 router? Here is what matters.: Seeing "Wi-Fi 7" on a product box or website is not the same as seeing the official Wi-Fi CERTIFIED 7™ seal. wi-fi.org/beacon/jeff-platon/buying-wi-fi-7-router-here-what…
  19. Wi-Fi Alliance, Wi-Fi Alliance blog, 5 Aug 2026: Buying a Wi-Fi 7 router? Here is what matters.: Buyers and network administrators can also confirm a product’s certification through the Wi-Fi Alliance Product Finder wi-fi.org/beacon/jeff-platon/buying-wi-fi-7-router-here-what…
  20. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: Wi-Fi 8 is the next generation of Wi-Fi® wi-fi.org/wi-fi-macphy

Author: Bulan Sarkar · Report an error

Numbers here are quoted from standards bodies and makers, or worked out from them. Nothing on this page was measured or tested by us.