Will It Work? · Guide
Router QoS: will device priority fix lag?
By Bulan Sarkar, founder of ElectronicsInfoline (since 2000)
QoS (quality of service) is the router setting that puts one device or app ahead of the others on your internet line. When it helps, when it does nothing, and what to set comes from two router makers' support pages, read on their US and India sites. Menus differ by model, so treat the steps as a guide to what to look for.
QoS gives a chosen device more bandwidth only when the line is full; it cannot make the line faster. One maker says it can help on plans of 250 Mbps or less (download and upload) in homes that game and stream, and is not needed at 300 Mbps or faster. Whatever the plan, give the router your line's real speed, or it cannot share it out.
What QoS does on a home router
QoS lets you prioritise the internet traffic of chosen devices (TP-Link)(TP-Link), or of chosen uses: downstream QoS for streaming apps, upstream QoS for online gaming (NETGEAR). On one maker's routers a bandwidth policy is preset, so you only set the device you care about to High Priority and choose how long it stays there. That device then gets more bandwidth when the network is overloaded (TP-Link)(TP-Link).
So priority matters only when the line is overloaded. With room to spare, every device already gets what it asks for and there is nothing for priority to decide.
When QoS helps, and when you do not need it
The other maker puts numbers on it. Its automatic QoS eases congestion when the internet bandwidth is limited and different demands compete for it. If your download and upload speed is 250 Mbps or less and you game and stream video, you can benefit; on a gigabit connection, or at 300 Mbps or faster, you do not need it (NETGEAR). QoS is off by default on its routers because typical users might not need it (NETGEAR).
The page gives no advice for speeds between 250 and 300 Mbps, or for a plan with a fast download and a slow upload. We do not fill that gap with a guess: if you sit there, try QoS and judge it by whether the problem goes away.
The speed you give the router
QoS needs to know how big the line is. One maker says you must specify your internet bandwidth so the router can allocate and prioritise traffic, and recommends its speed test, run while no other device is using the internet (NETGEAR). The other uses its own speed test for the total bandwidth; if that does not match what your provider sells you, set it by hand (TP-Link)(TP-Link). Older models ask you to enter the upload and download bandwidth from your provider (TP-Link)(TP-Link).
If your Wi-Fi is the slow part rather than the internet line, QoS on the internet side will not fix it. See Wi-Fi speed vs internet speed.
Setting a device to high priority
On one maker's web page the menu is Advanced > QoS > Application Priority or Device Priority; some models offer only one of the two. For a device, turn on Priority and pick how long it lasts in the Timing column (TP-Link)(TP-Link). Models without that menu use Advanced > QoS > Settings: enable QoS, enter the bandwidth, set the priority percentages, then add a high-priority rule for the device (TP-Link)(TP-Link).
Many routers also offer parental controls and guest networks in the same app; see router parental controls and guest Wi-Fi and IoT networks.
Tips and tricks
- Run the router’s speed test with every other device offline, or type in your plan’s figures if the test looks wrong.
- Put only the device you care about on high priority; on routers with a preset policy you do not need to set priorities for every device.
- Set a duration in the Timing column for a match or a work call rather than leaving priority on for good.
- On a plan of 300 Mbps or faster, one maker says you do not need QoS; leave it off unless you have a reason.
- Check the Wi-Fi signal where the device sits before you blame the internet line.
What we would do
On a plan of 250 Mbps or less with gaming or video calls at home, we would give the router its real line speed and set the console or work laptop to high priority for the hours it matters. On 300 Mbps or faster we would leave QoS off, as the maker suggests, and look at Wi-Fi coverage first if something still stutters.
Questions people ask
Does QoS make my internet faster? No. QoS decides which device or app is served first when the line is full; it cannot raise the speed of the line. When the line has room to spare, every device already gets what it asks for and priority changes nothing.
Should I turn on QoS for gaming? One router maker says homes on 250 Mbps or less, download and upload, that game and stream can benefit from its automatic QoS, and that on 300 Mbps or faster, or gigabit, you do not need it. Between 250 and 300 Mbps it gives no advice. For gaming, the same maker points to upstream QoS.
What speed should I enter in the QoS settings? The real download and upload speed of your line. The router can measure it with its own speed test; one maker says to run the test while no other device is online. If the result does not match your plan, type in the figures from your internet provider by hand.
Is QoS on by default? On one maker’s routers it is off by default, because most users do not need it. Another maker’s newer routers come with a preset policy, so you only pick the device to put on high priority and for how long.
Sources
Each figure on this page is quoted from the source below or worked out from them. Sources checked , each quote read again against the source in a second pass.
- TP-Link, TP-Link FAQ 1104 (US): what QoS does:
The QoS (Quality of Service) feature allows you to prioritize the internet traffic of specific devices to guarantee a faster connection when you need it the most. The router has preset an appropriate bandwidth allocation policy, so you don’t need to set different priorities for all devices. Simply set the desired device to High Priority and set how long you want it to remain in high priority, then the device will be allocated with more bandwidth when the network is overloaded.
tp-link.com/us/support/faq/1104/ - TP-Link, TP-Link FAQ 1104 (India): what QoS does:
The QoS (Quality of Service) feature allows you to prioritize the internet traffic of specific devices to guarantee a faster connection when you need it the most. The router has preset an appropriate bandwidth allocation policy, so you don’t need to set different priorities for all devices. Simply set the desired device to High Priority and set how long you want it to remain in high priority, then the device will be allocated with more bandwidth when the network is overloaded.
tp-link.com/in/support/faq/1104/ - TP-Link, TP-Link FAQ 1104 (US): Device Priority and the total bandwidth:
Click on Advanced > QoS > Application Priority/Device Priority (Some models support only one of these options). … The total bandwidth is the result of the Speed Test on our router. If it doesn’t match the bandwidth provided by your ISP, you can set it manually. … Toggle on Priority . Click the entry in the Timing column and select the time as the duration you want the device to be prioritized for.
tp-link.com/us/support/faq/1104/ - TP-Link, TP-Link FAQ 1104 (India): Device Priority and the total bandwidth:
Click on Advanced > QoS > Application Priority/Device Priority (Some models support only one of these options). … The total bandwidth is the result of the Speed Test on our router. If it doesn’t match the bandwidth provided by your ISP, you can set it manually. … Toggle on Priority . Click the entry in the Timing column and select the time as the duration you want the device to be prioritized for.
tp-link.com/in/support/faq/1104/ - TP-Link, TP-Link FAQ 1104 (US): routers without HomeShield or HomeCare:
Click on Advanced > QoS > Settings . Step 3. Enable QoS , enter the upload and download bandwidth provided by your internet service provider. Step 4. Click Advanced and drag the scroll bar to set the bandwidth priority percentage, then click on Save . Step 5. Add a high-priority QoS rule for the phone
tp-link.com/us/support/faq/1104/ - TP-Link, TP-Link FAQ 1104 (India): routers without HomeShield or HomeCare:
Click on Advanced > QoS > Settings . Step 3. Enable QoS , enter the upload and download bandwidth provided by your internet service provider. Step 4. Click Advanced and drag the scroll bar to set the bandwidth priority percentage, then click on Save . Step 5. Add a high-priority QoS rule for the phone
tp-link.com/in/support/faq/1104/ - NETGEAR, NETGEAR KB 23850: what QoS is:
Quality of Service (QoS) is a router feature that lets you prioritize your Internet bandwidth for specific uses. For example, if you stream lots of video, you can use downstream QoS to prioritize your streaming apps. If you play lots of online video games, you can use upstream QoS to prioritize your gaming. … QoS is disabled by default because typical users might not need to enable it.
kb.netgear.com/23850/What-is-Quality-of-Service-QoS-on-my-NE… - NETGEAR, NETGEAR KB 25617: when Dynamic QoS helps:
Dynamic QoS resolves traffic congestion when the Internet bandwidth is limited and different demands compete for bandwidth. If your Internet download and upload speed is 250 Mbps or less and you like gaming and streaming video, then you can benefit from enabling Dynamic QoS. Note: If you use a gigabit Internet connection, or your Internet download and upload speed is 300 Mbps or faster, then you don’t need to use Dynamic QoS.
kb.netgear.com/25617/How-does-Dynamic-QoS-help-improve-my-Ni… - NETGEAR, NETGEAR KB 25613: enabling Dynamic QoS:
Because not everyone uses Dynamic QoS, it is disabled by default. … You must specify your Internet bandwidth so that Dynamic QoS can perform bandwidth allocation and traffic prioritization. … For more accurate Speedtest results, make sure that no other devices are accessing the Internet.
kb.netgear.com/25613/How-do-I-enable-Dynamic-QoS-on-my-Night…