Will It Work? · Checker

What will this USB-C cable carry?

By , founder of ElectronicsInfoline (since 2000)

A certified USB-C cable carries a small logo on its plug grip, such as 40Gbps/240W. Pick that logo below and you see the watts and data speed the cable is certified for, then whether that covers your charger, laptop or drive. The rules come straight from the USB-IF's own logo documents.

The logo gives two limits. The Gbps figure is the data rate the cable is certified for (80, 40, 20 or 5). The W figure is power: 60W means 20 V × 3 A, 240W means 48 V × 5 A. A logo with watts and no Gbps marks a USB 2.0 cable, which carries data at up to 480 Mbps.

Two USB-C cable ends side by side on a wooden desk, a black one printed 40Gbps and 240W and a white one printed 60W, with a laptop and an external drive behind them.
Two USB-C cables with different printed speed and power ratings.

1. The cable

Look on the moulded grip behind the metal tip, or on the box.

2. What you want it to do

W

The watts your charger or laptop uses, say 65 or 100.

The speed of the port or drive, from its spec page.

With limitsCarries up to 60 W (20 V × 3 A) and data up to 20 Gbps

Power: Charges, but at 60 W at most: the cable stops the charger at 3 A. For 100 W you need a 240W cable.

Data: Yes: certified up to 20 Gbps, you need 10 Gbps.

The smallest logo that covers what you asked for: 20Gbps / 240W.

Show the working
  1. Logo 20Gbps/60W: rated 60 W = 20 V × 3 A.
  2. Data: certified up to 20 Gbps; a full-featured cable, so it has an e-marker.
  3. Need 100 W > 60 W rated: the cable caps it at 60 W.
  4. Need 10 Gbps ≤ 20 Gbps certified: fine.
What a 20Gbps/60W cable carriesCable logo: 20Gbps/60W. Power rating 60 W (20 V × 3 A). You need 100 W. Data up to 20 Gbps. You need 10 Gbps.20Gbps60We-marker: yesPower060 W100240 Wneed 100 WData480M5G10G20G40G80Gneed 10 Gbps
Blue: what the logo certifies. Red line: what you asked for. A red line beyond the blue bar means the cable falls short there.

The logo certifies a cable “up to” its figures. Your charger, laptop or drive has its own limits too; the charger and cable checker takes the charger label into account. Nothing here is measured.

The ten USB-C cable logos

The USB-IF lists ten logos for USB-C to USB-C cables: four data rates (80, 40, 20 and 5 Gbps), each with 240W or 60W, plus 240W and 60W on their own (USB-IF). A cable has to carry the right one to pass the USB-IF compliance program, and the logo goes on the cable itself, embossed or printed on the overmold (USB-IF).

The ten USB-IF cable logosTwo rows. 240W: 80Gbps/240W, 40Gbps/240W, 20Gbps/240W, 5Gbps/240W and 240W alone. 60W: 80Gbps/60W, 40Gbps/60W, 20Gbps/60W, 5Gbps/60W and 60W alone. There is no 10Gbps cable logo. The watts-only logos mark USB 2.0 cables.data ratedata ratedata ratedata ratewatts only80Gbps240W40Gbps240W20Gbps240W5Gbps240W240W80Gbps60W40Gbps60W20Gbps60W5Gbps60W60W240W= 48 V × 5 A, e-marker inside60W= 20 V × 3 A
Figure 1. Every logo the USB-IF lists for USB-C to USB-C cables. The four data rates are 80, 40, 20 and 5 Gbps; a logo with watts only marks a USB 2.0 cable (480 Mbps, not printed).

There is no 10Gbps cable logo. The USB-IF's chart notes that a 20Gbps cable supports USB 10Gbps (USB-IF), so a 10 Gbps drive or port wants a 20Gbps cable. The 5 and 20 Gbps cables pass the SuperSpeed tests; 20, 40 and 80 Gbps the USB4 tests (USB-IF).

Where the logo sits on a USB-C cableA USB-C plug drawn from the side. The metal plug tip on the left, the moulded grip called the overmold behind it, then the cable. The logo, here 40Gbps over 240W, is embossed or printed on the overmold. Inside the plug, a small chip marked e-marker.plug tipcable40Gbps240We-marker chip (inside)logo on the overmoldembossed or printed
Figure 2. The USB-IF asks for the logo on the cable itself, embossed or printed on the overmold (the moulded grip). The e-marker chip sits inside the plug, out of sight.

Reading a logo

A combined logo means the cable is rated for the watts and can support up to the Gbps speed shown (USB-IF). A watts-only logo means it is rated for those watts (USB-IF), and it marks a USB 2.0 cable: those carry data at up to 480 Mbps, a rate the logo doesn't show (USB-IF).

Reading a USB-C cable logo in two stepsStep one: does the logo show a Gbps figure? Yes means a full-featured cable with an e-marker, certified up to that rate. No means a USB 2.0 cable, up to 480 Mbps. Step two: the watts. 60W means 20 volts at 3 amps. 240W means 48 volts at 5 amps and an e-marker.Printed logoA Gbps figure on it?yesnoFull-featured cableup to the Gbps shownalways e-markedUSB 2.0 cableup to 480 Mbps(rate not printed)Then the watts60W = 20 V × 3 A · 240W = 48 V × 5 A
Figure 3. Two questions decode any of the ten logos. The Gbps figure, if there is one, is the data limit; the watts figure is the power limit.

The watts follow the USB-IF cable tests: 60W is 20 V at 3 A, the standard power range, and 240W is 48 V at 5 A, the extended range (USB-IF). Nothing above 240 W exists in USB Power Delivery (USB-IF), so a charge need above that gets “no” whatever the cable.

Worked examples

A 20Gbps/60W cable, a 100 W laptop and a 10 Gbps drive

Power: Charges, but at 60 W at most: the cable stops the charger at 3 A. For 100 W you need a 240W cable.

Data: Yes: certified up to 20 Gbps, you need 10 Gbps.

Result: with limits. Fine for the drive; the laptop charges, but slower than its charger allows.

What a 20Gbps/60W cable carriesCable logo: 20Gbps/60W. Power rating 60 W (20 V × 3 A). You need 100 W. Data up to 20 Gbps. You need 10 Gbps.20Gbps60We-marker: yesPower060 W100240 Wneed 100 WData480M5G10G20G40G80Gneed 10 Gbps
Figure 4. Blue: what the logo certifies. Red line: what you asked for. A red line beyond the blue bar means the cable falls short there.

A 240W cable (watts only) for the same laptop and drive

Power: Yes: rated 240 W, you need 100 W.

Data: Not at 10 Gbps: a watts-only logo means a USB 2.0 cable, up to 480 Mbps.

Result: no for the drive. This cable charges at full power but copies files at USB 2.0 speed.

A 40Gbps/240W cable, a 140 W laptop charger and a 40 Gbps port

Power: Yes: rated 240 W, you need 140 W.

Data: Yes: certified up to 40 Gbps, you need 40 Gbps.

Result: yes on both.

The e-marker, read from the logo

The e-marker is a chip in the plug that tells the charger what the cable can take. The logo tells you whether it is there. A cable with a Gbps figure is a full-featured cable, built for USB 3.2 and USB4 (USB-IF), and every full-featured cable is electronically marked (USB-IF). It carries USB 2.0 data as well (USB-IF).

A watts-only cable is a USB 2.0 cable (USB-IF), and those may or may not be e-marked. A 240W one must be, because every cable rated above 3 A is (USB-IF). Without the chip a cable counts as a standard 3 A cable (USB-IF), which at 20 V is 60 W.

Tips and tricks

  • Read both plugs and the box. The logo can be small or pressed into the plastic with no ink, so tilt the plug under a light.
  • A cable sold as “100W” with no USB-IF logo isn’t using one of the ten certified marks. The tool treats it as unmarked, because the USB-IF has no 100W cable logo to check it against.
  • Charging fine but file copies slow? Check for a watts-only logo. 240W on its own means a USB 2.0 cable.
  • For a 10 Gbps drive, look for 20Gbps. No cable logo says 10Gbps.
  • Label your cables once you know them: a strip of tape with “240W” or “40G” saves the next hunt.

What we would do

Buy cables by logo, not by the words in the listing title. For a phone or a laptop up to 60 W, a 60W cable is enough. For a laptop that uses more than 60 W, or a charger above 100 W, get a 240W cable. If you also connect a drive, dock or display, pick a combined logo with the data rate your port uses: 20Gbps covers 10 Gbps drives, 40Gbps and 80Gbps are for USB4 ports.

If one cable has to do everything, 40Gbps/240W or 80Gbps/240W covers charging up to the USB PD maximum and fast data. To check the charger as well, use the charger and cable checker; for what each rating means in more depth, read USB-C cable ratings explained.

Questions people ask

What does 40Gbps/240W on a USB-C cable mean? The cable is certified to carry data at up to 40 Gbps and power up to 240 W, which is 48 V at 5 A. The USB-IF puts that logo only on cables that passed both tests.

My cable only says 240W. How fast is it for data? A logo with watts and no Gbps figure marks a USB 2.0 cable. The USB-IF says those carry data at up to 480 Mbps and that the rate is not shown on the logo. It charges at full power but copies files at USB 2.0 speed.

Is there a 10Gbps USB-C cable logo? No. The USB-IF lists cable logos for 80, 40, 20 and 5 Gbps only. Its chart notes that a 20Gbps cable supports USB 10Gbps, so for a 10 Gbps drive pick a 20Gbps cable.

Will a 60W cable charge my 100 W laptop? It charges, but at 60 W at most. The cable is rated 20 V at 3 A, and the charger will not push more current through it. For more than 60 W you need a 240W cable.

How do I know if a USB-C cable has an e-marker chip? You can’t see it, but the logo tells you. Every cable with a Gbps figure is full-featured, and the Type-C specification says all of those are e-marked. A 240W cable is rated above 3 A, so it must have one too. A 60W USB 2.0 cable may or may not.

What if my cable has no logo at all? Then nothing about it is certified. A cable without an e-marker counts as a standard 3 A cable, so count on 60 W at most and an unknown data speed. The USB-IF requires the logo on the cable for every USB-C to USB-C cable it certifies.

Sources

Each figure on this page is quoted from the source below or worked out from them. Sources checked , each quote read again against the source in a second pass.

  1. USB-IF, USB Type-C® Cable Logo Usage Guidelines (Jan 2026): Statement 1 "The USB Type-C® Cable 80Gbps/240W Combined Logo is a trademark of USB Implementers Forum, Inc." Statement 2 "The USB Type-C® Cable 40Gbps/240W Combined Logo is a trademark of USB Implementers Forum, Inc." Statement 3 "The USB Type-C® Cable 20Gbps/240W Combined Logo is a trademark of USB Implementers Forum, Inc." Statement 4 "The USB Type-C® Cable 5Gbps/240W Combined Logo is a trademark of USB Implementers Forum, Inc." Statement 5 "The USB Type-C® Cable 80Gbps/60W Combined Logo is a trademark of USB Implementers Forum, Inc." Statement 6 "The USB Type-C® Cable 40Gbps/60W Combined Logo is a trademark of USB Implementers Forum, Inc." Statement 7 "The USB Type-C® Cable 20Gbps/60W Combined Logo is a trademark of USB Implementers Forum, Inc." Statement 8 "The USB Type-C® Cable 5Gbps/60W Combined Logo is a trademark of USB Implementers Forum, Inc." Statement 9 "The USB Type-C® Cable 240W Logo is a trademark of USB Implementers Forum, Inc." Statement 10 "The USB Type-C® Cable 60W Logo is a trademark of USB Implementers Forum, Inc." usb.org/sites/default/files/usb_type-c_cable_logo_usage_guid…
  2. USB-IF, USB Type-C® Cable Logo Usage Guidelines (Jan 2026): All USB-C® to USB-C cables are required to use the USB-IF approved cable logo on the cable in the form of either being embossed on the over mold or printed on the overmold usb.org/sites/default/files/usb_type-c_cable_logo_usage_guid…
  3. USB-IF, USB Type-C® Cable Logo Usage Guidelines (Jan 2026): In order to pass through the USB-IF Compliance Program, all USB-C® to USB-C cables must be labeled using the appropriate data rate and power wattage cable logo. For example, a USB 20Gbps cable that supports 20V at 3A must be marked with the Combined Performance and Power 20Gbps/60W logo. usb.org/sites/default/files/usb_type-c_cable_logo_usage_guid…
  4. USB-IF, USB Type-C® Cable Logo Usage Guidelines (Jan 2026): The logo must indicate the cable's power rating (i.e. 240W or 60W) and signaling cababilities usb.org/sites/default/files/usb_type-c_cable_logo_usage_guid…
  5. USB-IF, USB-IF Licensed Mark(s) Requirements (January 2026): Rated for the number of watts and can support up to the Gbps speed as indicated in the designation. usb.org/sites/default/files/trademark_license_agreement_lice…
  6. USB-IF, USB-IF Licensed Mark(s) Requirements (January 2026): SuperSpeed USB 5Gbps, 10Gbps, or 20Gbps, Test Procedure or USB4® 20Gbps, 40Gbps, 80Gbps Test Procedure (as applicable based on the designation in the logo). usb.org/sites/default/files/trademark_license_agreement_lice…
  7. USB-IF, USB-IF Licensed Mark(s) Requirements (January 2026): Note: USB Type-C® 20Gbps Cable supports USB 10Gbps performance. usb.org/sites/default/files/trademark_license_agreement_lice…
  8. USB-IF, USB-IF Licensed Mark(s) Requirements (January 2026): Rated for the number of watts as indicated in the designation. usb.org/sites/default/files/trademark_license_agreement_lice…
  9. USB-IF, USB Type-C® Cable Logo Usage Guidelines (Jan 2026): While USB 2.0 Type-C® 240W and 60W cables that delivers data at up to 480Mbps, this data performance capability is not required to be included on the cable and is not reflected in the charging logos. usb.org/sites/default/files/usb_type-c_cable_logo_usage_guid…
  10. USB-IF, USB Active Cable Thermal Compliance Test Specification, Revision 0.92 (draft): Power delivery is set to maximum specification: 60W (20V, 3A) for SPR cable, or 240W (48V, 5A) for EPR cable. usb.org/sites/default/files/USB%20Active%20Cable%20Thermal%2…
  11. USB-IF, USB Type-C Cable and Connector Specification, Release 2.0 (August 2019): The USB Type-C receptacle is specified for current capability of 5 A whereas standard USB Type-C cable assemblies are rated for 3 A. [...] Also, USB Type-C cable assemblies designed for USB PD and appropriately identified via electronic marking are allowed to support up to 5 A. usb.org/sites/default/files/USB%20Type-C%20Spec%20R2.0%20-%2…
  12. USB-IF, USB Type-C Cable and Connector Specification, Release 2.0 (August 2019): All cables that are either full-featured and/or are rated at more than 3 A current are Electronically Marked Cables. usb.org/sites/default/files/USB%20Type-C%20Spec%20R2.0%20-%2…
  13. USB-IF, USB Type-C Cable and Connector Specification, Release 2.0 (August 2019): All USB Full-Featured Type-C cables are electronically marked. USB 2.0 Type-C cables may be electronically marked. usb.org/sites/default/files/USB%20Type-C%20Spec%20R2.0%20-%2…
  14. USB-IF, USB Type-C Cable and Connector Specification, Release 2.0 (August 2019): A USB Type-C to Type-C cable that supports USB 2.0, USB 3.2 and USB4 data operation. This cable includes SBU wires and is an Electronically Marked Cable. usb.org/sites/default/files/USB%20Type-C%20Spec%20R2.0%20-%2…
  15. USB-IF, USB Type-C Cable and Connector Specification, Release 2.0 (August 2019): USB Full-Featured Type-C cable with a USB Full-Featured Type-C plug at both ends for USB 3.2, USB4 and full-featured applications usb.org/sites/default/files/USB%20Type-C%20Spec%20R2.0%20-%2…
  16. USB-IF, USB Type-C Cable and Connector Specification, Release 2.0 (August 2019): USB 2.0 Type-C cable with a USB 2.0 Type-C plug at both ends for USB 2.0 applications usb.org/sites/default/files/USB%20Type-C%20Spec%20R2.0%20-%2…
  17. USB-IF, USB Charger (USB Power Delivery) | USB-IF: Announced in 2021, the USB PD Revision 3.1 specification is a major update to enable delivering up to 240W of power over full featured USB Type-C® cable and connector. Prior to this update, USB PD was limited to 100W using a solution based on 20V using USB Type-C cables rated at 5A. usb.org/usb-charger-pd

Author: Bulan Sarkar · Report an error

The check runs in your browser; nothing you type is sent anywhere. Numbers here are quoted from standards bodies and makers, or worked out from them. Nothing on this page was measured or tested by us.