Will It Work? · Guide
Router firmware update: the checks before you click
By Bulan Sarkar, founder of ElectronicsInfoline (since 2000)
A firmware update is the router's own software being replaced, and if it goes wrong the router can be left unable to start. The checks below come from two router makers' support pages, read on their US and India sites. Menus differ by model, so treat the steps as a guide to what to look for.
Before you click, match the file to the router's model, hardware version and region of purchase, back up the settings and read the release notes. Update over an Ethernet cable and do not switch off or unplug anything until the router has restarted. A router that updates itself saves you the file work.
Why routers get firmware updates
Match the file to the router
Check the hardware version before you update; the wrong firmware file can damage the router and void the warranty. Download only from the maker's site for the region you bought it in: US and EU files are different and are not interchangeable (TP-Link)(TP-Link).
The hardware version is on the label under the router. A string "Ver: 1.2" means hardware version V1.2, and normally V1.x counts as V1 (TP-Link)(TP-Link). The model must match exactly too: a similar name is a different router.
Automatic or by hand
Some routers update themselves. On one maker's cloud-connected routers you click the Update icon at the top right of the web page, or update from its app; others must be updated by hand under Advanced > System > Firmware Upgrade (TP-Link)(TP-Link). An online update needs a steady internet connection, because losing it during the download can damage the router (TP-Link)(TP-Link).
The other maker lets you turn automatic updates on or off under Advanced > Administration > Router Update, in the Router Auto Firmware Update section (NETGEAR). Those updates run between 1:00 and 4:00 a.m. in the router's time zone (NETGEAR).
Before any update, read the release notes. If they mention a reset, the router's settings, including the internet login and the Wi-Fi name and password, go back to factory defaults and you set the router up again (TP-Link)(TP-Link).
A manual update, step by step
Back up the configuration so you can restore it afterwards, or write down every setting you changed. Use a wired connection: do not update over Wi-Fi unless the router has no Ethernet port. After the upload the router restarts by itself; wait about 3 minutes (TP-Link)(TP-Link). Do not turn it off or pull the Ethernet cable at any point (TP-Link)(TP-Link).
The other maker's steps are the same in outline: connect the computer by Ethernet, download the file for your model, unzip it and upload the file ending in .img or .chk. Its update takes about 2 minutes, and until the router has restarted you should not go online, turn it off or touch it (NETGEAR). No Ethernet port on your laptop? See USB-C to Ethernet adapters.
If the update fails or sticks
A manual upload fails when the file is still zipped: extract it first, and the file to upload is the .bin file, not the folder. If the progress bar stops, wait 5 minutes before you do anything, then refresh the page or try another browser. If an online update fails, set the router's DNS server by hand to a public address such as 8.8.8.8 or 1.1.1.1 (TP-Link)(TP-Link).
A sudden power cut during the update gives a high chance the router will be bricked (TP-Link)(TP-Link). Where cuts are common, update when the supply is steady; for keeping the router running through a cut, see Wi-Fi in a power cut.
Tips and tricks
- Read the model and the "Ver" line off the label before you open the download page.
- Download from the maker’s site for the country you bought the router in.
- Back up the settings file first, or write down every setting you changed.
- Plug the computer in with an Ethernet cable and leave the router alone until it has restarted.
- If the progress bar sticks, wait 5 minutes before you refresh.
- If your router can update itself, check its time zone so the updates land when you expect them.
What we would do
If the router offers automatic updates, we would turn them on and set its time zone. For a manual update, we would note the model and "Ver" line from the label, download that exact file from the maker's site for our country, back up the settings, read the release notes, plug in by Ethernet and keep our hands off until the restart is done.
Questions people ask
Should I update my router’s firmware? The makers say updates bring security fixes and new features. Many newer routers can update themselves; on others you download the file and upload it by hand. Read the release notes first, in case the update resets your settings.
How do I find my router’s hardware version? Look at the label underneath. A string such as "Ver: 1.2" means hardware version V1.2, and normally any 1.x counts as V1. Pick the same version on the maker’s download page.
Can I use firmware from another country’s site? No. Download it from the maker’s site for the country where you bought the router. One maker says US and EU firmware files are different and cannot be swapped, and that the wrong file can damage the router and void the warranty.
The router says the file is wrong. What now? The download is usually a .zip; extract it first. One maker's router takes a .bin file, another's a .img or .chk file. Then check that the file matches the model, the hardware version and the region.
What if the update gets stuck? Wait 5 minutes. If it still has not finished, refresh the page and try again, or use a different browser. If an online update fails, one maker suggests setting the router's DNS server by hand to a public one such as 8.8.8.8 or 1.1.1.1, or updating by hand from the downloaded file.
Sources
Each figure on this page is quoted from the source below or worked out from them. Sources checked , each quote read again against the source in a second pass.
- TP-Link, TP-Link FAQ 2796 (US): before you update:
Always verify the hardware version of your device before updating. Using the wrong firmware file can damage the device and void the warranty. Download firmware only from the TP-Link official website matching your purchase region. EU and US firmware files are different and are not interchangeable. Do not turn off the router or disconnect the Ethernet cable at any point during the firmware upgrade.
tp-link.com/us/support/faq/2796/ - TP-Link, TP-Link FAQ 2796 (India): before you update:
Always verify the hardware version of your device before updating. Using the wrong firmware file can damage the device and void the warranty. Download firmware only from the TP-Link official website matching your purchase region. EU and US firmware files are different and are not interchangeable. Do not turn off the router or disconnect the Ethernet cable at any point during the firmware upgrade.
tp-link.com/in/support/faq/2796/ - TP-Link, TP-Link FAQ 2796 (US): manual vs automatic update:
Routers that do not support TP-Link Cloud must be updated manually: log in to tplinkwifi.net, navigate to Advanced > System > Firmware Upgrade, and upload the extracted BIN file. Routers that support TP-Link Cloud can update automatically, either by clicking the Update icon in the upper right corner of the web management page or via the Tether app under More > System > Firmware Update .
tp-link.com/us/support/faq/2796/ - TP-Link, TP-Link FAQ 2796 (India): manual vs automatic update:
Routers that do not support TP-Link Cloud must be updated manually: log in to tplinkwifi.net, navigate to Advanced > System > Firmware Upgrade, and upload the extracted BIN file. Routers that support TP-Link Cloud can update automatically, either by clicking the Update icon in the upper right corner of the web management page or via the Tether app under More > System > Firmware Update .
tp-link.com/in/support/faq/2796/ - TP-Link, TP-Link FAQ 2796 (US): backup, wired, reboot time:
Back up the configuration in order to restore it after upgrading. Or, write down all the settings you changed from the default values, as you may need to re-enter them manually. … DO NOT upgrade the firmware via a wireless connection unless your TP-Link device has no LAN/Ethernet port. … The device will reboot automatically after upgrading. Please wait about 3 minutes.
tp-link.com/us/support/faq/2796/ - TP-Link, TP-Link FAQ 2796 (India): backup, wired, reboot time:
Back up the configuration in order to restore it after upgrading. Or, write down all the settings you changed from the default values, as you may need to re-enter them manually. … DO NOT upgrade the firmware via a wireless connection unless your TP-Link device has no LAN/Ethernet port. … The device will reboot automatically after upgrading. Please wait about 3 minutes.
tp-link.com/in/support/faq/2796/ - TP-Link, TP-Link FAQ 2796 (US): release notes that mention a reset:
Pay attention to the release logs. If it mentions a reset after the upgrade, your previous configuration on the router, including internet access and wireless settings, will be reset to factory defaults
tp-link.com/us/support/faq/2796/ - TP-Link, TP-Link FAQ 2796 (India): release notes that mention a reset:
Pay attention to the release logs. If it mentions a reset after the upgrade, your previous configuration on the router, including internet access and wireless settings, will be reset to factory defaults
tp-link.com/in/support/faq/2796/ - TP-Link, TP-Link FAQ 2796 (US): hardware version on the label:
There is a character string "Ver: X.Y" (for example, Ver:1.0), and the number X.Y is the hardware version of the device. If the string is "Ver: 1.2", it means that the hardware version is V1.2. (Normally V1.x=V1).
tp-link.com/us/support/faq/2796/ - TP-Link, TP-Link FAQ 2796 (India): hardware version on the label:
There is a character string "Ver: X.Y" (for example, Ver:1.0), and the number X.Y is the hardware version of the device. If the string is "Ver: 1.2", it means that the hardware version is V1.2. (Normally V1.x=V1).
tp-link.com/in/support/faq/2796/ - TP-Link, TP-Link FAQ 2796 (US): online update needs a steady connection:
Ensure you have a stable internet connection during the download. Loss of connection during the process can damage the router.
tp-link.com/us/support/faq/2796/ - TP-Link, TP-Link FAQ 2796 (India): online update needs a steady connection:
Ensure you have a stable internet connection during the download. Loss of connection during the process can damage the router.
tp-link.com/in/support/faq/2796/ - TP-Link, TP-Link FAQ 2571 (US): when an update fails:
If an online firmware update fails, manually setting the router's DNS server to a public DNS address such as 8.8.8.8 or 1.1.1.1 can resolve the issue. For manual updates, the firmware file must be extracted after downloading. The correct file format is a .bin file, not a compressed folder. … If the update progress bar is stuck, wait five minutes before taking action. If it does not complete, try refreshing the browser or switching to Firefox, Microsoft Edge, or Chrome.
tp-link.com/us/support/faq/2571/ - TP-Link, TP-Link FAQ 2571 (India): when an update fails:
If an online firmware update fails, manually setting the router's DNS server to a public DNS address such as 8.8.8.8 or 1.1.1.1 can resolve the issue. For manual updates, the firmware file must be extracted after downloading. The correct file format is a .bin file, not a compressed folder. … If the update progress bar is stuck, wait five minutes before taking action. If it does not complete, try refreshing the browser or switching to Firefox, Microsoft Edge, or Chrome.
tp-link.com/in/support/faq/2571/ - TP-Link, TP-Link FAQ 2571 (US): power cut during an update:
If there is a sudden power outage during the upgrade, there is a high chance that the router will become bricked.
tp-link.com/us/support/faq/2571/ - TP-Link, TP-Link FAQ 2571 (India): power cut during an update:
If there is a sudden power outage during the upgrade, there is a high chance that the router will become bricked.
tp-link.com/in/support/faq/2571/ - NETGEAR, NETGEAR KB 000059139: when automatic updates run:
Automatic firmware updates happen between 1:00 a.m. and 4:00 a.m. in your router’s time zone. These updates include important security upgrades and feature enhancements.
kb.netgear.com/000059139/When-do-automatic-firmware-updates-… - NETGEAR, NETGEAR KB 000038662: turning automatic updates on or off:
When new firmware is available, you can allow your router to automatically update its firmware to the latest version. Updating your router’s firmware keeps your router up to date with the latest features and security fixes. … Select ADVANCED > Administration > Router Update . … Scroll down to the Router Auto Firmware Update section.
kb.netgear.com/000038662/How-do-I-enable-disable-auto-firmwa… - NETGEAR, NETGEAR KB 23960: manual firmware update:
The simplest ways of updating your firmware on your NETGEAR router are with the Nighthawk app or automatically through a webpage. … Connect your computer to your router with an Ethernet cable. … locate and select the firmware file that ends in .img or .chk . … The firmware update process takes about two minutes. After you start the firmware update, do not try to go online, turn off the router, or do anything else to the router until it finishes restarting.
kb.netgear.com/23960/How-do-I-manually-update-the-firmware-o…