Will It Work? · Guide
Wi-Fi network name: one name or separate band names, and why not to hide it
By Bulan Sarkar, founder of ElectronicsInfoline (since 2000)
Every router lets you set its Wi-Fi network name (the SSID), and most let you give each band its own name or hide the name altogether. This guide covers what the makers recommend for each of those choices, the one case where separate band names help, and what to do on your devices after a change. It is drawn from three makers' own support pages.
Use one name for 2.4, 5 and 6 GHz, on every router and extender in the home, and make it your own rather than a default like linksys, netgear, dlink, wireless, 2wire. Leave the name visible: hiding it does not secure the network and can expose your network name when your devices go looking for it. Give 2.4 GHz its own name only if a 2.4 GHz-only device will not join.
One name for every band
One maker recommends a single, unique name for all bands, and the same name on every router in the home (Apple). With a different name on the 2.4, 5 or 6 GHz band, it says, devices might not connect reliably to the network, to all of its routers, or to all of their bands (Apple). A second maker also typically recommends the same name and password on all bands (NETGEAR).
Some routers do this for you with band steering. On one maker's routers it is called Smart Connect: the 2.4 and 5 GHz bands share one name and password, and the router puts each device on a band (TP-Link). The Wi-Fi bands guide covers what each band is good for.
Pick a name that is yours
Do not keep a common or default name such as linksys, netgear, dlink, wireless, 2wire. Devices that have joined one network with that name are more likely to meet another with the same name and try to connect to it automatically (Apple). The name is case-sensitive (Apple), and so is the password (TP-Link), so type both exactly the same on every router, extender and mesh unit.
The name is broadcast to everyone nearby, so leave your flat number, full name and phone number out of it. No maker page says this; it is our own advice.
When a device needs its own band name
The one case for separate names is a device that cannot join the shared one. One maker says some smart-home devices only support 2.4 GHz and may have trouble connecting when both bands share a name (TP-Link). Its fix: turn Smart Connect off, then change one of the names so the device sees two networks (TP-Link). Turning Smart Connect off does not change the names by itself (TP-Link). On its routers the switch is under Advanced > Wireless > Wireless Settings (TP-Link).
The same idea applies to 6 GHz on business access points: one maker's guide says some older or IoT devices cannot join a network that requires WPA3 and protected management frames, and suggests a separate network with 6 GHz off and WPA3 not set for them (TP-Link). The guest and IoT Wi-Fi guide shows the other way to give smart-home kit its own name.
After you change the name
If you are connected over Wi-Fi when you save a new name or password, you will be disconnected; join again with the new details (TP-Link). Devices that joined the old network may need to forget it and join again, after which they use the new settings (Apple). For smart plugs, cameras and printers, check each one's app for how it joins a new network.
When you replace a router, giving the new one the old name and password leaves nothing new to type on each device.
Tips and tricks
- Use one name, exactly the same, on every band, router, extender and mesh unit.
- Change a default name such as linksys, netgear, dlink: your devices may try to join strangers’ networks with the same name.
- Keep personal details out of the name; everyone nearby can read it.
- Leave “hide network name” off. If your router says “closed”, that means hidden.
- Split off a 2.4 GHz name only for the device that will not join, and rename it yourself after turning band steering off.
- Moving to a new router? Give it the old name and password, so there is nothing new to type on each device.
What we would do
We would use one visible name of our own on every band and every unit, with WPA3 or WPA2/WPA3 and a strong password. Only if a 2.4 GHz-only plug or camera refused to join would we turn band steering off and give the 2.4 GHz band a second name for that device.
Questions people ask
Should 2.4 GHz and 5 GHz have the same Wi-Fi name? Yes, for most homes. One maker recommends one name, case for case, on every band and every router in the home; with separate names, devices may not connect reliably to every band or router. Give the 2.4 GHz band its own name only if a 2.4 GHz-only smart-home device will not join.
Does hiding my Wi-Fi name make it more secure? No. Hiding the name does not hide the network from detection or stop someone getting in. Because of the way devices search for networks, a device that uses a hidden network might also expose information that identifies you and that network. The security setting and a strong password protect it.
Why does my phone show a privacy warning on my own network? One cause is a hidden network name: a phone may warn about it because of the privacy risk. Turn the hidden setting off on the router, then forget the network on the phone and join it again.
My smart plug only works on 2.4 GHz and will not connect. What do I change? Turn band steering off (one maker calls it Smart Connect), then rename the 2.4 GHz band yourself, because turning the feature off does not change the names. Join the plug to the 2.4 GHz name. Everything else can stay on the main name.
Sources
Each figure on this page is quoted from the source below or worked out from them. Sources checked , each quote read again against the source in a second pass.
- Apple, Apple Support 102766: Recommended settings for Wi-Fi routers (network name):
Set to a single, unique name (case-sensitive) for all bands. … Make sure that all routers on your network use the same name for every band they support. If you give your 2.4 GHz, 5 GHz, or 6 GHz bands different names, devices might not connect reliably to your network, to all routers on your network, or to all available bands of your routers. … Don't use common names or default names such as linksys , netgear , dlink , wireless , or 2wire . Otherwise, devices that join your network are more likely to encounter other networks that have the same name, and then automatically try to connect to them.
support.apple.com/en-us/102766 - Apple, Apple Support 102766: Recommended settings for Wi-Fi routers (hidden network):
Hidden network Set to Disabled. … Your router might incorrectly use “closed” to mean hidden, and “broadcast” to mean not hidden. Hiding the network name doesn't conceal the network from detection or secure it against unauthorized access. And because of how devices search for and connect to Wi-Fi networks, using a hidden network might expose information that can be used to identify you and the hidden networks you use, such as your home network. When connected to a hidden network, your device might show a privacy warning because of this privacy risk. … To secure access to your network, use the appropriate security setting instead.
support.apple.com/en-us/102766 - Apple, Apple Support 102766: forget the network after changing settings:
After changing settings, you might need to forget the network on each device that previously joined the network. The device then uses the router's new settings when rejoining the network.
support.apple.com/en-us/102766 - TP-Link, TP-Link FAQ 3085: Wi-Fi name, Hide SSID and Smart Connect:
Hide SSID : When enabled, the network name is hidden from Wi-Fi scans. To connect, you must manually enter the SSID and password on your device. … Smart Connect : When enabled, your router uses the same Wi-Fi name (SSID) for both the 2.4GHz and 5GHz bands. … Note that the password is case-sensitive. If you’re connected via Wi-Fi, you’ll be disconnected after saving changes—just reconnect using the new credentials. … Go to your wireless settings and disable Smart Connect . Then manually change one of the Wi-Fi names (SSID) to something different so your device can see them as two separate networks. … Disabling Smart Connect doesn’t automatically change the SSID.
tp-link.com/us/support/faq/3085/ - TP-Link, TP-Link FAQ 2595: Smart Connect on or off:
When Smart Connect is enabled, both bands share the same network name (SSID) and password … For example, some smart home devices only support 2.4GHz and may have trouble connecting when both bands share the same SSID. … Smart Connect can be enabled via the router's web management page at tplinkwifi.net (go to Advanced > Wireless > Wireless Settings )
tp-link.com/us/support/faq/2595/ - NETGEAR, NETGEAR KB 000064415: one name, WPA3 on 6 GHz, WPA2/WPA3 on 2.4 and 5 GHz:
We typically recommend that you use the same WiFi network name (SSID) and password for all WiFi bands on your router, with WPA3-PSK security for the 6 GHz band and WPA2/WPA3-PSK security for the 2.4 GHz and 5 GHz bands.
kb.netgear.com/000064415/ - TP-Link, TP-Link Omada Support 13253: legacy and IoT clients:
Some legacy clients or IOT devices do not support WPA3 or PMF (Protect Management Frames), even if PMF is set to Disable or Capable in Controller, they still cannot connect to the relevant SSID. For this case, please create a separate SSID (with 6GHz turned off and WPA3 not set) for them.
support.omadanetworks.com/us/document/13253/