Will It Work? · Guide
Wi-Fi interference: Bluetooth, microwaves, neighbours and walls
By Bulan Sarkar, founder of ElectronicsInfoline (since 2000)
Wi-Fi that drops when the microwave runs, headphones that crackle when a laptop downloads, a connection that slows every evening: these are blamed on interference, and only some of them are. This guide sets out what the makers' pages list as sources of interference, how Bluetooth and Wi-Fi share a band, which materials get in the way, and how to tell interference from a busy provider line. It gives no speed-loss figures, because the makers give none.
Most interference is on 2.4 GHz, which Wi-Fi shares with Bluetooth, microwave ovens, baby monitors, garage door openers and more. Move the device and the router away from those sources, put Wi-Fi devices on 5 GHz where they can use it (Bluetooth cannot), and restart the router so it picks a quieter channel. If it is slow every evening, test on a cable: that is often shared provider bandwidth, not interference.
Signs of interference
One maker lists what interference looks like: a device that does not connect or stay connected, a slow connection with low signal strength, Bluetooth audio that skips, stutters, cuts off or buzzes, and a mouse pointer that jumps (Apple). None of these proves interference on its own: a weak signal far from the router looks the same, which is why the router placement guide is worth a look first.
Bluetooth and Wi-Fi together
Bluetooth and Wi-Fi both use 2.4 GHz, but many Wi-Fi devices can use 5 GHz instead. If your router has both bands, connecting more Wi-Fi devices to 5 GHz may help, and some dual-band routers do this for you (Apple). Bluetooth has no such option, so the way to help it is to move Wi-Fi devices off 2.4 GHz. For headphones or a mouse that keep breaking up, the same maker says to bring the two Bluetooth devices closer together (Apple).
One maker also recommends a 20 MHz channel width on 2.4 GHz, because wider channels are more open to interference, including from Bluetooth devices (Apple). The channel and channel width guide shows where that setting lives, and the Wi-Fi bands guide covers what each band trades.
Neighbours: their Wi-Fi and their evening use
Neighbours affect you in two separate ways. Their Wi-Fi networks use the same channels as yours. Most routers scan for the channel with the least interference when they start up or are reset, and you can also pick a different channel by hand (Apple). On 2.4 GHz, one maker suggests channels 1, 6, 11 in the USA and 1, 7, 13 in Europe, and says to change channel when you see lost connections or slow transfers (NETGEAR).
The second way is not radio at all. If you and your neighbours use the same provider, you may share its bandwidth, and speeds can drop after work hours when more of them are online (NETGEAR). Changing channels will not fix that. Run a speed test on an Ethernet cable at the slow time; if the cable is slow too, take it up with the provider. The Wi-Fi vs internet speed guide explains the difference.
Walls, water and metal
What sits between the router and the device matters too. One maker ranks materials by interference potential: wood, glass and many synthetic materials low; water, bricks and marble medium; plaster, concrete and bulletproof glass high; metal very high (Apple). Its own examples: a metal surface between a Bluetooth mouse and the computer, or a metal-reinforced concrete floor between the router and the device.
Fixes, cheapest first
- Move the device closer to the router, or the router away from the microwave, cordless phone and other sources.
- Connect more Wi-Fi devices to 5 GHz, so 2.4 GHz is left to Bluetooth and the devices that need it.
- Bring the two Bluetooth devices closer together.
- Move USB 3 drives and hubs away from the laptop and use shielded cables.
- Restart the router so it scans for a quieter channel, or pick a channel by hand.
Every step above comes from one maker's list (Apple). If none helps and the signal is weak only in far rooms, the cause is more likely distance and walls; the mesh roaming guide covers devices that cling to a far unit.
Tips and tricks
- Sort the symptom first: drops near the microwave are interference; slow every evening is usually the provider.
- Put laptops, phones and TVs on 5 GHz where they can use it; that leaves 2.4 GHz to Bluetooth.
- Keep 2.4 GHz at 20 MHz wide; wider channels pick up more interference.
- Restart the router after moving it: most rescan for a quieter channel on startup.
- Move USB 3 drives and hubs away from a laptop whose Wi-Fi or Bluetooth mouse misbehaves.
- Keep other devices at least 3 ft (0.91 m) from a cable modem.
What we would do
We would first check whether the slowdown follows a place (near the microwave, behind a concrete wall) or a time (every evening). For a place, we would move the router or the device and put everything that can use 5 GHz on it. For a time, we would test on a cable and talk to the provider before touching any Wi-Fi setting.
Questions people ask
Can Bluetooth interfere with Wi-Fi? Yes, on 2.4 GHz. Bluetooth and Wi-Fi both use that band, and Bluetooth cannot move off it. Many Wi-Fi devices can use 5 GHz instead, so moving them there leaves 2.4 GHz to the Bluetooth headphones, mouse and speaker.
Does a microwave oven really slow Wi-Fi? It can. One maker lists microwave ovens among the household devices that use the 2.4 GHz band, and another lists them as a common source of interference. Keep the router and the device you are using away from it, or use 5 GHz in the kitchen.
Do neighbours’ Wi-Fi networks interfere with mine? They share the same channels, which is why routers scan for the least busy channel when they start up or are reset. On 2.4 GHz, one maker suggests channels 1, 6, 11 in the USA and 1, 7, 13 in Europe. Restart the router to let it choose again, or pick a channel by hand if drops continue.
Why is my internet slow only in the evening? That is usually not radio interference. One maker says that if you and your neighbours share the same provider, you may share bandwidth, and speeds can drop after work hours when more people are online. Test on an Ethernet cable at the same time; if it is slow there too, it is the line, not the Wi-Fi.
Which walls block Wi-Fi the most? Metal blocks the most, then plaster, concrete and bulletproof glass, then water, bricks and marble. Wood, glass and many synthetic materials block the least, according to one maker. That maker’s own example is a metal-reinforced concrete floor between the router and the device.
Sources
Each figure on this page is quoted from the source below or worked out from them. Sources checked , each quote read again against the source in a second pass.
- Apple, Apple Support 102319: Resolve Wi-Fi and Bluetooth issues caused by wireless interference:
Wireless interference can cause Wi-Fi and Bluetooth devices to disconnect or perform poorly … Device doesn't connect or stay connected Connection is slow and signal strength is low Bluetooth audio skips, stutters, cuts off, or has static or buzzing* Pointer movement is erratic or jumpy … Bring your Wi-Fi device closer to your Wi-Fi router. Bring the Bluetooth devices that are connecting to each other closer together. … Avoid using your wireless devices near common sources of interference, such as power cables, microwave ovens, fluorescent lights, wireless video cameras, and cordless phones. … Both Bluetooth and Wi-Fi devices use the 2.4 GHz band, but many Wi-Fi devices can use the 5 GHz band instead. If your Wi-Fi router supports both bands, it might help to connect more of your Wi-Fi devices to the 5GHz band. Some dual-band routers manage this for you automatically. … Configure your Wi-Fi router to use a different Wi-Fi channel, or have it scan for the channel with the least interference. Most routers perform this scan automatically on startup or when reset. … Use a high-quality, shielded USB or Thunderbolt 3 cable with each device. Move your USB 3 or Thunderbolt 3 devices—including any USB hubs—farther away from your wireless devices. Avoid placing USB 3 or Thunderbolt 3 devices on top of your Mac. … a metal surface between your Bluetooth mouse and computer could cause the mouse to perform poorly, and a metal-reinforced concrete floor between your Wi-Fi router and Wi-Fi device could cause poor Wi-Fi performance. … Low interference potential: wood, glass, and many synthetic materials Medium interference potential: water, bricks, marble High interference potential: plaster, concrete, bulletproof glass Very high interference potential: metal
support.apple.com/en-us/102319 - NETGEAR, NETGEAR KB 000037824: what can affect WiFi performance:
Many WiFi-enabled technologies and other household devices use the 2.4 GHz band, including microwaves, garage door openers, and baby monitors. Some WiFi devices like smart speakers also use the 2.4 GHz band to transfer real-time audio. When multiple devices attempt to use the same radio space, overcrowding occurs. … If you and your neighbors have the same Internet service provider (ISP), you might share bandwidth with them. If you share bandwidth with your neighbors, you might experience slower Internet speeds after work hours … While uncommon, some cable modems can interfere with other WiFi devices. To prevent interference, make sure that other devices are at least three feet away from your cable modem.
kb.netgear.com/000037824/ - Apple, Apple Support 102766: Recommended settings for Wi-Fi routers (channel and channel width):
Channel Set to Auto. … When channel selection is set to automatic, your router … use a different channel, especially if they are close to each other. … Set to 20 MHz for the 2.4 GHz band. Set to Auto or all widths for the 5 GHz and 6 GHz bands. … Wider channels are faster but more susceptible to interference … including Bluetooth devices. … Wireless interference is less of a concern in these bands.
support.apple.com/en-us/102766 - NETGEAR, NETGEAR KB 1027: selecting wireless channels:
You are experiencing interference (shown by lost connections or slow data transfers). … Devices that use 802.11b and 802.11g can be tuned to one of 11 channels in North America, 13 channels in Europe. … These are channels 1, 6 & 11 in USA. Channels 1, 7 & 13 in Europe. … choose channels as widely spaced as possible, preferably at least five channels apart. For example, use channels 1 and 6, or channels 4 and 10.
kb.netgear.com/1027/