Will It Work? · Guide

USB-C to Ethernet adapter: what speed will you get?

By , founder of ElectronicsInfoline (since 2000)

A thin laptop or a phone with only USB-C ports needs an adapter to plug into a network cable. Adapters are sold as gigabit or 2.5 gigabit, but the number on the box is only one of four links in the chain. This guide works out what each link allows, from USB-IF, the adapter makers' spec pages and Apple's phone specs.

The wired link runs no faster than the slowest of four: your device's USB-C port, the adapter's USB side, the adapter's Ethernet port and the router or switch port. A USB 2.0 port caps it at 480 Mbps; a gigabit router port caps it at 1,000 Mbps, even with a 2.5 gigabit adapter.

Four links, and the slowest one wins

Data goes from the phone or computer's USB-C port into the adapter, out of the adapter's Ethernet port, and down the cable to the router or switch. Each of those has its own top rate. On the Ethernet side the two ends settle on the highest speed both support (Apple), and on the USB side the slower of the port and the adapter sets the pace. So the ceiling for the whole chain is the lowest of the four.

A 2.5 gigabit adapter on a laptop, plugged into a gigabit router portphone or computer port 5,000 Mbps, adapter USB side 5,000 Mbps, adapter Ethernet port 2,500 Mbps, router or switch port 1,000 Mbps. Ceiling 1,000 Mbps, set by the router or switch port.Phone orcomputer port5,000 MbpsAdapterUSB side5,000 MbpsAdapterEthernet port2,500 MbpsRouter orswitch port1,000 MbpsCeiling: 1,000 Mbps (slowest link, in red)
Figure 1. A laptop's USB 3.0 port and the adapter both have 5 Gbps, the adapter's Ethernet port has 2.5 gigabit, and the router's LAN port is gigabit. The router port sets the ceiling at 1,000 Mbps.

The ceiling is not a promise. TP-Link says actual wired throughput is not guaranteed and varies with the environment, the Ethernet cable class and the computer's performance (TP-Link). For how this compares with your internet plan, see box speed vs internet speed.

The USB side: USB 2.0 or USB 3.0

A USB 2.0 connection carries up to 480 Mbps (USB-IF). TP-Link gives USB 3.0 up to 5 Gbps, ten times USB 2.0 (TP-Link), and 5 Gbps is the lowest of the five rates USB-IF names for USB 3.2 and USB4 (USB-IF).

The adapters themselves say which USB they use. TP-Link's 2.5 gigabit adapter lists a USB 3.0 Type-C input on both its US and India pages (TP-Link)(TP-Link), and its gigabit adapters list USB 3.0 too (TP-Link)(TP-Link). A USB 3.0 gigabit adapter also works in an older USB 2.0 port (TP-Link), but then the USB side holds it to 480 Mbps.

USB port rates against Ethernet port speedsUSB 2.0 port 480 Mbps, 1 Gigabit port 1,000 Mbps, 2.5 Gigabit port 2,500 Mbps, USB 3.0 port 5,000 Mbps. USB 2.0 is below gigabit; USB 3.0 is above 2.5 gigabit.USB 2.0 port480 Mbps1 Gigabit port1,000 Mbps2.5 Gigabit port2,500 MbpsUSB 3.0 port5,000 MbpsRed: below gigabit. Bars to scale.
Figure 2. A USB 2.0 port tops out at 480 Mbps, under half of a gigabit Ethernet port. A USB 3.0 port, at 5 Gbps, has room for a 2.5 gigabit adapter. These are rates on paper, not measured speeds.

The Ethernet side: the router or switch port

A 2.5 gigabit adapter only links at 2.5 gigabit when the port at the other end does too. So check the router's LAN ports first: the US and the India router we checked each list four gigabit LAN ports (TP-Link)(TP-Link). Into one of those, a 2.5 gigabit adapter links at 1 gigabit.

The cable matters at 2.5 gigabit. TP-Link says peak performance from its 2.5 gigabit adapter needs Cat5e or higher (TP-Link), and IEEE 802.3bz runs 2.5 Gbps over 100 metres of Category 5e (Fluke Networks). To check a cable and port pair, use the Ethernet port and cable checker.

Phones: the USB-C port is often USB 2

Apple lists USB to Ethernet adapters among the accessories that work with an iPhone's USB-C port (Apple). The port speed is what limits it. The spec pages for iPhone 17, iPhone Air and iPhone 17e give the port as USB 2, up to 480 Mb/s (Apple)(Apple)(Apple)(Apple). With a gigabit adapter on one of those phones, the ceiling is 480 Mbps, set by the phone.

A gigabit adapter on a phone with a USB 2 portphone or computer port 480 Mbps, adapter USB side 5,000 Mbps, adapter Ethernet port 1,000 Mbps, router or switch port 1,000 Mbps. Ceiling 480 Mbps, set by the phone or computer port.Phone orcomputer port480 MbpsAdapterUSB side5,000 MbpsAdapterEthernet port1,000 MbpsRouter orswitch port1,000 MbpsCeiling: 480 Mbps (slowest link, in red)
Figure 3. The phone's USB 2 port is the slowest link at 480 Mbps. The adapter and the router agree on gigabit between themselves, but the phone can only take 480 Mbps of it.

Other phones vary, so read the port line on the maker's spec page. For more on what a phone's USB-C port can do, see what your phone's USB-C port supports.

Three setups worked out

The same rule each time, using the maker figures above: the laptop with a 2.5 gigabit adapter on a gigabit router port, the same laptop on a 2.5 gigabit port, and a USB 2 phone with a gigabit adapter.

Three adapter setups and the ceiling each one reaches1. Laptop + 2.5G, gigabit router port; limit: router port: 1,000 Mbps; 2. Laptop + 2.5G, 2.5 gigabit port; limit: router port: 2,500 Mbps; 3. Phone + 1G, USB 2 phone, gigabit router; limit: phone port: 480 Mbps1. Laptop + 2.5G1,000 Mbpsgigabit router port; limit: router port2. Laptop + 2.5G2,500 Mbps2.5 gigabit port; limit: router port3. Phone + 1G480 MbpsUSB 2 phone, gigabit router; limit: phone port
Figure 4. Same rule each time: the slowest of the four links sets the ceiling. A faster adapter only helps when the ports at both ends are faster too.

A hub or dock with an Ethernet port follows the same chain, with its own USB link to the computer. To check a whole hub setup (screens, Ethernet and charging together), use the USB-C hub and dock checker.

Tips and tricks

  • Before paying more for 2.5 gigabit, look at the LAN port line on your router’s spec page. If it says gigabit, a gigabit adapter gives the same link.
  • Plug the adapter into a USB-C port, not a USB-A port through a converter, unless you know that USB-A port is USB 3.0 or faster.
  • On a phone, read the USB-C line on the maker’s spec page. "USB 2" means the phone, not the adapter, sets the ceiling.
  • Check the link speed your computer reports after plugging in. If it is lower than the slowest link in your chain, try another cable or another port first.
  • If a working adapter stops after an operating system update, look for a newer driver in the maker’s download centre. TP-Link says its adapter may need one after an update.

What we would do

We would match the adapter to the slowest thing we cannot change. With a gigabit router or switch, a USB 3.0 gigabit adapter is all the link can use. A 2.5 gigabit adapter makes sense when the router, switch or network storage at the other end has a 2.5 gigabit port and the computer has a USB 3.0 or faster port. On a phone with a USB 2 port, any gigabit adapter will do, because the phone sets the ceiling.

Questions people ask

What speed will a USB-C to Ethernet adapter give me? No more than the slowest of four links: the USB-C port on your phone or computer, the adapter’s USB side, the adapter’s Ethernet port and the router or switch port at the other end. That figure is a ceiling; the maker of one adapter says actual throughput is not guaranteed.

Is a 2.5 gigabit adapter worth it with a normal router? Only if the router or switch has a 2.5 gigabit port. Plugged into a gigabit port, a 2.5 gigabit adapter links at 1,000 Mbps, the same as a gigabit adapter.

Does a USB-C Ethernet adapter work on an iPhone? Apple lists USB to Ethernet adapters among the accessories you can connect to an iPhone with USB-C. On models whose spec page says USB 2 (up to 480 Mb/s), such as iPhone 17, that is the ceiling, below a gigabit Ethernet port.

Will a USB 3.0 adapter work in a USB 2.0 port? A USB 3.0 gigabit adapter from TP-Link says it is compatible with USB 2.0, so it works, but the link is then held to USB 2.0’s 480 Mbps.

What cable do I need for a 2.5 gigabit adapter? Cat5e or better. The maker of one 2.5 gigabit adapter says peak performance needs Cat5e or higher, and IEEE 802.3bz runs 2.5 Gbps over 100 metres of Cat5e.

Sources

Each figure on this page is quoted from the source below or worked out from them. Sources checked , each quote read again against the source in a second pass.

  1. TP-Link, TP-Link UE302C (US): USB Type-C to 2.5 Gigabit Ethernet adapter, specifications: Output Interface 2.5 Gigabit RJ45 Ethernet Port Input Interface USB 3.0 Type-C Port tp-link.com/us/home-networking/usb-adapter/ue302c/
  2. TP-Link, TP-Link UE302C (India): USB Type-C to 2.5 Gigabit Ethernet adapter, specifications: Output Interface 2.5 Gigabit RJ45 Ethernet Port Input Interface USB 3.0 Type-C Port tp-link.com/in/home-networking/adapter/ue302c/
  3. TP-Link, TP-Link UE302C: cable note: Peak performance is attainable only with Cat5e or higher Ethernet cables. tp-link.com/us/home-networking/usb-adapter/ue302c/
  4. TP-Link, TP-Link UE302C (US): throughput note: Actual wired data throughput is not guaranteed and will vary as a result of environmental factors, Ethernet cable class, and computer performance. tp-link.com/us/home-networking/usb-adapter/ue302c/
  5. TP-Link, TP-Link UE310C (US): USB 3.0 to Gigabit Ethernet adapter, specifications: Output Interface 1 Gigabit RJ45 Ethernet Port Input Interface USB 3.0 Type-A & Type-C Port tp-link.com/us/home-networking/usb-adapter/ue310c/
  6. TP-Link, TP-Link UE300 (India): USB 3.0 to Gigabit Ethernet adapter, specifications: Output Interface 1 10/100/1000Mbps RJ45 Ethernet Port Input Interface 1 USB 3.0 Port tp-link.com/in/home-networking/adapter/ue300/
  7. TP-Link, TP-Link UE300 (India): USB 2.0 compatible: through a USB 3.0 port, also being compatible with USB 2.0 and USB1.1 standard tp-link.com/in/home-networking/adapter/ue300/
  8. TP-Link, TP-Link UE330C (US): USB 3.0 hub + Gigabit Ethernet adapter: support transfer speed up to 5 Gbps, 10 times faster than USB 2.0 tp-link.com/us/home-networking/usb-adapter/ue330c/
  9. USB-IF, USB Type-C® and USB 2.0 Type-C™ Cable and Connector Language Usage Guidelines: Supports up to 480Mbps data operation usb.org/sites/default/files/usb_type-c_language_product_and_…
  10. USB-IF, USB Data Performance Language Usage Guidelines from USB-IF (Jan 2024): The USB4® and USB 3.2 specifications together identify five transfer rates – 80Gbps, 40Gbps, 20Gbps, 10Gbps, and 5Gbps. usb.org/sites/default/files/usb_data_performance_language_us…
  11. Apple, Charge and connect with the USB-C connector on your iPhone (Apple Support, US): These iPhone models support connecting to external displays using the USB-C connector ... iPhone 18 Pro models iPhone Duo iPhone 17 models (except iPhone 17e) iPhone 16 models (except iPhone 16e) iPhone 15 models ... When you connect an external display, it mirrors the built-in display of your iPhone. This doesn't apply if you're using an app with a second-screen experience, like a video app. ... iPhone models that don't support connecting to external displays using the USB-C connector can mirror and play content using AirPlay ... iPhone uses the DisplayPort protocol to support connections to USB-C displays at up to 4K resolution and 60Hz. ... use a USB-C cable that supports USB 3.1 or higher ... Some USB-C displays can also charge your iPhone while it's connected. ... You can connect your iPhone to an HDMI display or TV with a USB-C to HDMI adapter or cable. Adapters and cables that support HDMI 2.0 can output video from your iPhone at 4K resolution and 60Hz. ... You can use your iPhone 15 and later to charge your AirPods, Apple Watch, or another small device that supports USB Power Delivery at up to 4.5 watts. ... If you have another device with a USB-C connector, connect the device to your iPhone with a USB-C cable, such as the one included with your iPhone. ... To charge a device that has a Lightning connector, connect the device to your iPhone using an Apple USB-C to Lightning cable. ... You can also use the USB-C connector to listen with wired headphones or other audio accessories ... use the Apple USB-C to 3.5 mm Headphone Jack Adapter ... These iPhone models support fast USB 3.2 Gen 2 speeds up to 10Gbit per second when using an optional 1 USB 3 cable: iPhone 18 Pro models iPhone Duo iPhone 17 Pro models iPhone 16 Pro models iPhone 15 Pro models ... The USB-C cable that comes with your iPhone supports charging and USB 2 speeds. If you want to use a USB 3 device, use a compliant USB 3 cable that supports 10Gbit/s. ... Devices and cables that aren't compliant with the USB-C standard might not work as expected. ... If you experience slower Wi-Fi or cellular performance while using a USB-C accessory, performance should return to normal after the accessory is disconnected. ... External storage devices Monitors and external displays Microphones External battery packs USB to Ethernet adapters SD cards using SD card adapters support.apple.com/en-us/105099
  12. Apple, Apple iPhone 17: Tech Specs (US), USB-C line: USB-C connector with support for: Charging DisplayPort USB 2 (up to 480Mb/s) apple.com/iphone-17/specs/
  13. Apple, Apple iPhone 17 (India): Tech Specs, USB-C line: USB-C connector with support for: Charging DisplayPort USB 2 (up to 480 Mbps) apple.com/in/iphone-17/specs/
  14. Apple, Apple iPhone Air: Tech Specs (US), USB-C line: USB-C connector with support for: Charging USB 2 (up to 480Mb/s) apple.com/iphone-air/specs/
  15. Apple, Apple iPhone 17e: Tech Specs (US), USB-C line: USB-C connector with support for: Charging USB 2 (up to 480Mb/s) apple.com/iphone-17e/specs/
  16. Apple, Apple Support: About the 10 Gigabit Ethernet port on Mac (Mac User Guide): Depending on the device you’re connecting to, the cable type and technology used, and the cable length, the highest link speed is automatically negotiated. For example, if the device you’re connecting to is 10 Gbit/s-capable and the cable can support the speed, the two devices would negotiate the 10 Gbit/s speed. support.apple.com/guide/mac-help/mchlcef4be50/mac
  17. TP-Link, TP-Link Archer AX55 (US): Ethernet ports and speed note, specifications: Ethernet Ports 1× Gigabit WAN Port 4× Gigabit LAN Ports ... Actual network speed may be limited by the rate of the product's Ethernet WAN or LAN port tp-link.com/us/home-networking/wifi-router/archer-ax55/
  18. TP-Link, TP-Link Archer AX23 (India): Ethernet ports, specifications: Ethernet Ports 1× Gigabit WAN Port 4× Gigabit LAN Ports tp-link.com/in/home-networking/wifi-router/archer-ax23/
  19. Fluke Networks, Fluke Networks blog: Will My Existing Cable Plant Support 2.5/5GBASE-T? (17 Jan 2018): IEEE 802.3bz specifies 2.5 Gbps over 100 meters of Category 5e cabling or 5 Gbps over 100 meters of Category 6 cabling. It also includes support for 5 Gbps over Category 5e on defined use cases (extended frequencies). flukenetworks.com/blog/cabling-chronicles/will-my-existing-c…
  20. TP-Link, TP-Link UE302C (US): driver note: To ensure compatibility, you may need to update the adapter's drivers after an OS update. tp-link.com/us/home-networking/usb-adapter/ue302c/

Author: Bulan Sarkar · Report an error

Numbers here are quoted from standards bodies and makers, or worked out from them. Nothing on this page was measured or tested by us.