Will It Work? · Guide

2.4 GHz vs 5 GHz vs 6 GHz: what each Wi-Fi band is for

By , founder of ElectronicsInfoline (since 2000)

Most home routers broadcast two or three networks at once, one per band. Which one should the TV, the laptop and the smart plug use? And is the newest band, 6 GHz, even allowed where you live? This guide answers both from what the Wi-Fi Alliance publishes, including its country-by-country map of 6 GHz rules.

2.4 GHz is for basic needs such as web surfing and smart-home devices; 5 GHz is less crowded, for high-performance use; 6 GHz is clear of older Wi-Fi 4 and Wi-Fi 5 devices and holds the widest channels, but only Wi-Fi 6E and 7 devices use it. Some countries allow the full 6 GHz band (1200 MHz, e.g. the United States); others, India among them, only the lower 500 MHz.

What each band is for

The Wi-Fi Alliance describes 5 GHz as the less crowded band, used for high-performance applications, and 2.4 GHz as the band for basic needs such as web surfing and IoT (smart-home) devices (Wi-Fi Alliance). 6 GHz offers clear spectrum, with less interference from older Wi-Fi 4 or Wi-Fi 5 devices, and room for wider channels (Wi-Fi Alliance).

2.4 GHz and 5 GHz are the bands of every generation up to Wi-Fi 6 (Wi-Fi Alliance). 6 GHz takes a Wi-Fi 6E or Wi-Fi 7 device (Wi-Fi Alliance), and Wi-Fi 7 uses all three bands (Wi-Fi Alliance). Which generation is which: Wi-Fi 4, 5, 6, 6E and 7.

What each Wi-Fi band is for2.4 GHz for basic needs such as web surfing and smart-home devices; 5 GHz, less crowded, for high-performance applications; 6 GHz, clear of older Wi-Fi 4 and Wi-Fi 5 devices and with the widest channels, for Wi-Fi 6E and Wi-Fi 7 devices.2.4 GHzbasic needsweb surfingand smart-home(IoT) devicesevery generation5 GHzless crowdedhigh-performanceapplicationsevery generation6 GHzclear spectrumno Wi-Fi 4 or 5devices; widestchannelsWi-Fi 6E and 7
Figure 1. How the Wi-Fi Alliance describes the three bands. A dual- or tri-band router runs them side by side, and each device joins the band it supports.

Why a router runs two or three bands at once

Dual-band networks double capacity, the Wi-Fi Alliance says, because devices can use 5 GHz for demanding work and 2.4 GHz for basic needs (Wi-Fi Alliance). A tri-band Wi-Fi 6E or Wi-Fi 7 router adds 6 GHz as a third. Each device joins a band it supports; one that lists only 2.4 GHz never sees the other two.

6 GHz: the full band or only the lower part, by country

Each country's regulator decides how much of 6 GHz Wi-Fi may use. The Wi-Fi Alliance map shows two outcomes: the lower part, 5925/5945 to 6425 MHz, or the full band, 5925 to 7125 MHz (Wi-Fi Alliance). That is 500 MHz against 1200 MHz, so the full band is 2.4 times as wide.

On the day checked, the map showed United States, Canada, Saudi Arabia, South Korea on the full band, and India, United Kingdom, Germany, Australia, Japan, Singapore, United Arab Emirates, South Africa on the lower band (Wi-Fi Alliance). Australia has also allowed 6425-6585 MHz on top of its lower band (Wi-Fi Alliance). A country not shown here may have adopted neither, or may have acted since; the map itself is the place to check.

6 GHz Wi-Fi: the lower band against the full band, by countryLower band 5925 (or 5945) to 6425 MHz, 500 MHz wide: India, United Kingdom, Germany, Australia, Japan, Singapore, United Arab Emirates, South Africa. Full band 5925 to 7125 MHz, 1200 MHz wide: United States, Canada, Saudi Arabia, South Korea.Frequency (MHz)592564257125lower: 500 MHzfull: 1200 MHzLower band onlyIndia, United KingdomGermany, AustraliaJapan, SingaporeUnited Arab Emirates, South AfricaFull bandUnited StatesCanadaSaudi ArabiaSouth Korea
Figure 2. From the Wi-Fi Alliance's regulations map, on the date checked. Each country's regulator decides, and the map changes; check your own country there before counting on the upper part.

How many wide channels fit in each

The wider a channel, the fewer fit in a band. Wi-Fi 6 can use channels up to 160 MHz (Wi-Fi Alliance); Wi-Fi 7 adds 320 MHz channels in 6 GHz (Wi-Fi Alliance). Dividing the band width by the channel width and rounding down gives the most that fit side by side:

  • Full band, 1200 MHz: 1200 ÷ 160 → 7 channels of 160 MHz; 1200 ÷ 320 → 3 of 320 MHz.
  • Lower band, 480 to 500 MHz: 3 of 160 MHz and 1 of 320 MHz.

For the full band the Wi-Fi Alliance gives the same 7 channels of 160 MHz, and 14 of 80 MHz (Wi-Fi Alliance). Where only the lower band is open, a Wi-Fi 7 router has one 320 MHz channel to work with, and any nearby Wi-Fi 7 router using 320 MHz has that same single channel.

160 MHz and 320 MHz channels that fit in each 6 GHz bandLower band (480 to 500 MHz): 3 channels of 160 MHz, 1 of 320 MHz. Full band (1200 MHz): 7 of 160 MHz, 3 of 320 MHz.Lower band, 160 MHz channels: 3Lower band, 320 MHz channels: 1Full band, 160 MHz channels: 7Full band, 320 MHz channels: 3grey: band width (lower drawn from 5945 MHz), to scale
Figure 3. Band width divided by channel width, rounded down, no overlap. The full-band count of 7 × 160 MHz matches the Wi-Fi Alliance's own figure. Where only the lower band is open, a Wi-Fi 7 router has room for 1 channel of 320 MHz.

What about range through walls?

The Wi-Fi Alliance pages used here give no range or wall figures for these three bands, so this guide does not either. If a device keeps dropping off 5 GHz or 6 GHz in a far room, it can join 2.4 GHz instead; a router that runs all its bands at once lets each device choose.

Tips and tricks

  • Check the bands on your smart-home gadgets. Any that list only 2.4 GHz need that band left on, even if phones and laptops use 5 GHz or 6 GHz.
  • Check the device too. A 6 GHz network is invisible to a phone or laptop that does not list 6 GHz.
  • In a lower-band country, a router's 320 MHz mode has 1 channel to use. Read the spec for the channel widths it offers there.
  • The 6 GHz map changes as regulators decide. Look at the date beside the source on this page and re-check the map if it is old.
  • Switching a band off to push devices onto another strands every device that lists only the band you switched off.

What we would do

Put fixed, demanding devices (TV, desktop, work laptop) on 5 GHz, or on 6 GHz if both ends list it. Leave smart-home gadgets and anything that only lists 2.4 GHz on 2.4 GHz. Pay for a 6 GHz router only if your own devices list 6 GHz and your country allows it; in a lower-band country, do not count on Wi-Fi 7's wide channels.

For the generation names, see Wi-Fi 4 to Wi-Fi 7. To keep the router and fibre box running in a power cut, use the power-cut backup calculator and the Wi-Fi in a power cut guide.

Questions people ask

Should I use 2.4 GHz or 5 GHz Wi-Fi? The Wi-Fi Alliance describes 5 GHz as the less crowded band, for high-performance applications, and 2.4 GHz as the band for basic needs such as web surfing and smart-home (IoT) devices. A dual-band router runs both, so each device can sit on the band that suits it.

Is 6 GHz Wi-Fi allowed in India? On the Wi-Fi Alliance's regulations map, India has adopted the lower 6 GHz band, 5925/5945-6425 MHz, not the full band up to 7125 MHz. The map changes as regulators act, so check it on the day you buy.

Which countries allow the full 6 GHz band for Wi-Fi? Of the countries this page lists, the map shows United States, Canada, Saudi Arabia, South Korea on the full 5925-7125 MHz band (1200 MHz). India, United Kingdom, Germany, Australia, Japan, Singapore, United Arab Emirates, South Africa are on the lower band.

Can my old phone connect to 6 GHz Wi-Fi? Only if it lists 6 GHz, which means Wi-Fi 6E or Wi-Fi 7. Wi-Fi 4 and Wi-Fi 5 devices do not use 6 GHz; the Wi-Fi Alliance gives that as one reason the band is clear. Older devices stay on 2.4 GHz or 5 GHz.

Why does a Wi-Fi 7 router matter less where only the lower 6 GHz band is open? Wi-Fi 7's widest channels are 320 MHz and exist only in 6 GHz. The lower band (480-500 MHz wide) holds 1 such channel side by side; the full 1200 MHz band holds 3.

Sources

Each figure on this page is quoted from the source below or worked out from them. Sources checked , each quote read again against the source in a second pass.

  1. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: Most Wi-Fi 5 products are dual-band, operating in both the 2.4 GHz and 5 GHz bands. Dual-band networks double capacity because devices can use the less crowded 5 GHz band for high performance applications, and the 2.4 GHz band for basic needs such as web surfing and IoT applications. wi-fi.org/wi-fi-macphy
  2. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: Wi‑Fi 6 also introduced Wi‑Fi in the 6 GHz band in addition to the 2.4 GHz and 5 GHz bands available in previous generations wi-fi.org/wi-fi-macphy
  3. Wi-Fi Alliance, Wi-Fi Alliance press release, 3 Jan 2020: Wi-Fi 6E for 6 GHz: Wi-Fi 6E brings a common industry name for Wi-Fi® users to identify devices that will offer the features and capabilities of Wi-Fi 6 – including higher performance, lower latency, and faster data rates – extended into the 6 GHz band. wi-fi.org/news-events/newsroom/wi-fi-alliance-brings-wi-fi-6…
  4. Wi-Fi Alliance, Wi-Fi Alliance press release, 3 Jan 2020: Wi-Fi 6E for 6 GHz: greater availability of wider channel sizes, and accessibility to clear spectrum with less interference from legacy Wi-Fi 4 or Wi-Fi 5 devices wi-fi.org/news-events/newsroom/wi-fi-alliance-brings-wi-fi-6…
  5. Wi-Fi Alliance, Wi-Fi Alliance press release, 3 Jan 2020: Wi-Fi 6E for 6 GHz: 6 GHz addresses Wi-Fi spectrum shortage by providing contiguous spectrum blocks to accommodate 14 additional 80 MHz channels and 7 additional 160 MHz channels wi-fi.org/news-events/newsroom/wi-fi-alliance-brings-wi-fi-6…
  6. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: Introduced in 2024, Wi-Fi 7 enhances performance across the 2.4 GHz, 5 GHz, and 6 GHz bands wi-fi.org/wi-fi-macphy
  7. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: 320 MHz channels available in the 6 GHz band provide twice the throughput of Wi-Fi 6, enabling multigigabit Wi-Fi device speeds wi-fi.org/wi-fi-macphy
  8. Wi-Fi Alliance, Wi-Fi Alliance: Wi-Fi (MAC/PHY) technologies: 160 MHz channel utilization capability increases bandwidth to deliver greater performance with low latency wi-fi.org/wi-fi-macphy
  9. Wi-Fi Alliance, Wi-Fi Alliance: Regulations enabling 6 GHz Wi-Fi (country map): Adopted 5925/5945-6425 MHz Adopted 5925-7125 MHz wi-fi.org/regulations-enabling-6-ghz-wi-fi
  10. Wi-Fi Alliance, Wi-Fi Alliance: Regulations enabling 6 GHz Wi-Fi (country map): Australia 5925/5945-6425 MHz ... Canada 5925-7125 MHz ... Germany 5925/5945-6425 MHz ... India 5925/5945-6425 MHz ... Japan 5925/5945-6425 MHz ... Saudi Arabia 5925-7125 MHz ... Singapore 5925/5945-6425 MHz ... South Africa 5925/5945-6425 MHz ... South Korea 5925-7125 MHz ... United Arab Emirates 5925/5945-6425 MHz ... United Kingdom 5925/5945-6425 MHz ... United States 5925-7125 MHz wi-fi.org/regulations-enabling-6-ghz-wi-fi
  11. Wi-Fi Alliance, Wi-Fi Alliance: Regulations enabling 6 GHz Wi-Fi (country map): Australia has also allowed Wi-Fi operations in the 6425-6585 MHz band, in addition to 5925-6425 MHz wi-fi.org/regulations-enabling-6-ghz-wi-fi

Author: Bulan Sarkar · Report an error

Numbers here are quoted from standards bodies and makers, or worked out from them. Nothing on this page was measured or tested by us.